Features:
- Inductance can be ignored due to rectifier control. With same output current,the power factor of the welder is greatly improved, up to 0.8-0.9.
-Â Â Three-phase secondary rectification welding machine has the advantages of having no affect in the balance of external electricity net.
Control system:
Adopting German technology. Components include Mitsubishi PLC, SMC pneumatic components, OMRON induction switch, to ensure the stability of the whole machine.
Drive system:
AC servo motor drive ensures accurate and stable operation.
Conductive system:
Conductive shaft using silver conductive tile rotary device which results in good conductivity.
Pressure system:
Pressurization systems are uniformly regulated to transfer pressure. The related components are made in Taiwan or Japan.
Cooling system:
This machine adopts inner cooling system, which not only makes the work environment clean and tidy, but also effectively ensures the safety of working machine.
Welding wheel &Â Adjusting system:
Welding wheels are made from high quility Copper Alloy  from our company which are durable in use and have excellent conductivity. At the same time the machine is equipped with welding wheel adjusting system, which helps surface of welding wheel to be smooth.
Technical Parameters:
| Â | Unit | Parameter | Remarks | |
| Rated capacity | KVA | 3*100 | 3 phase secondry commutator | |
| Primary voltage | V | 380 | Â | |
| Frequency | Hz | 50 | Â | |
| Persistency rate of rated load | % | 50 | Â | |
| Secondary voltage | V | 5.4,6.3 | Â | |
| Maximum welding thickness of workpiece | Mm | 2.5+2.5 | Â | |
| Rated welding thickness | Mm | 2+2 | Â | |
| Stretching-length of electrode arm | Mm | ≤1200 | Effective length | |
| Welding oil Tank size | Minimum width | Mm | 200 | Â |
| The minimum margin of welding line | Mm | 120 | Â | |
| Working stroke of upper welding wheel | Mm | 20-60 | Â | |
| Working stroke of down welding wheel | Mm | Fixed | Â | |
| Welding speed | M/min | 1.2~3.0 | Â | |
| Maximum working pressure | N(kgf) | 5000 | Â | |
| Pressure of compressed air of air source | MPa(kgf/cm²) | 0.5 |  | |
| Consumption of compressed air | M³/h | 6.0 | Natural condition | |
| Consumption of cooling water | L/h | 2400 | Â | |
| Motor power | Kw | 0.55+0.55 | 2 motors | |
About Us:
1. Payment:
Acturally, payment would be preferred: Normally we choose in T/T, usually is 40~50% deposit and pay the balance before shipment.L/C.
2. Delivery time:
The goods need 90 working  days to be made after receive deposit.
3. Why choose us?
 We are China Leading manufacturer. We are confident that with our experience in welding machine etc. Quick delivery time, excellent quality and comprehensive superior service we can give our customers complete satisfaction.Â
 For large order, engineer can be sent to your country for on-site mainternace instructions.
Â
4.Our 100% Promise:
1. 24 hours online service.
2. We always say FINE to my customer.
3. The above product photos are coming from main production.
4. Thanks and the first cooperation to be expected.
For more information, please visit our website.(www.jywuxing.com)Welcome to visit our factory. we are sincerely want to start business with each customer. Enquiry are welcomed.
Â
1.Your inquiry related to our product &Â price will be replied within 24 hours
2.Well-trained &Â experienced staff are to answer all your inquiries in English
3.Working time: 8:00am ~17:00pm, Monday to Friday. (UTC+8)
4.Customized solution &Â perfect after-sale service
5. For large order, engineer can be sent to your country for on-site mainternace instructions.
6.Our advantage:1.Competitive price  2.Good quality  3.Timely delivery  4.New model launch yearly Â
                              5.Own manufacturing  6.own quality controlÂ
Contact us:
Tel:Â Â +86-510-86027183
Mob:Â Â +86-13921230558
Fax:Â Â +86-510-86027228
Web: www.jywuxing.com
Features:
- Inductance can be ignored due to rectifier control. With same output current,the power factor of the welder is greatly improved, up to 0.8-0.9.
-Â Â Three-phase secondary rectification welding machine has the advantages of having no affect in the balance of external electricity net.
Control system:
Adopting German technology. Components include Mitsubishi PLC, SMC pneumatic components, OMRON induction switch, to ensure the stability of the whole machine.
Drive system:
AC servo motor drive ensures accurate and stable operation.
Conductive system:
Conductive shaft using silver conductive tile rotary device which results in good conductivity.
Pressure system:
Pressurization systems are uniformly regulated to transfer pressure. The related components are made in Taiwan or Japan.
Cooling system:
This machine adopts inner cooling system, which not only makes the work environment clean and tidy, but also effectively ensures the safety of working machine.
Welding wheel &Â Adjusting system:
Welding wheels are made from high quility Copper Alloy  from our company which are durable in use and have excellent conductivity. At the same time the machine is equipped with welding wheel adjusting system, which helps surface of welding wheel to be smooth.
Technical Parameters:
| Â | Unit | Parameter | Remarks | |
| Rated capacity | KVA | 3*100 | 3 phase secondry commutator | |
| Primary voltage | V | 380 | Â | |
| Frequency | Hz | 50 | Â | |
| Persistency rate of rated load | % | 50 | Â | |
| Secondary voltage | V | 5.4,6.3 | Â | |
| Maximum welding thickness of workpiece | Mm | 2.5+2.5 | Â | |
| Rated welding thickness | Mm | 2+2 | Â | |
| Stretching-length of electrode arm | Mm | ≤1200 | Effective length | |
| Welding oil Tank size | Minimum width | Mm | 200 | Â |
| The minimum margin of welding line | Mm | 120 | Â | |
| Working stroke of upper welding wheel | Mm | 20-60 | Â | |
| Working stroke of down welding wheel | Mm | Fixed | Â | |
| Welding speed | M/min | 1.2~3.0 | Â | |
| Maximum working pressure | N(kgf) | 5000 | Â | |
| Pressure of compressed air of air source | MPa(kgf/cm²) | 0.5 |  | |
| Consumption of compressed air | M³/h | 6.0 | Natural condition | |
| Consumption of cooling water | L/h | 2400 | Â | |
| Motor power | Kw | 0.55+0.55 | 2 motors | |
About Us:
1. Payment:
Acturally, payment would be preferred: Normally we choose in T/T, usually is 40~50% deposit and pay the balance before shipment.L/C.
2. Delivery time:
The goods need 90 working  days to be made after receive deposit.
3. Why choose us?
 We are China Leading manufacturer. We are confident that with our experience in welding machine etc. Quick delivery time, excellent quality and comprehensive superior service we can give our customers complete satisfaction.Â
 For large order, engineer can be sent to your country for on-site mainternace instructions.
Â
4.Our 100% Promise:
1. 24 hours online service.
2. We always say FINE to my customer.
3. The above product photos are coming from main production.
4. Thanks and the first cooperation to be expected.
For more information, please visit our website.(www.jywuxing.com)Welcome to visit our factory. we are sincerely want to start business with each customer. Enquiry are welcomed.
Â
1.Your inquiry related to our product &Â price will be replied within 24 hours
2.Well-trained &Â experienced staff are to answer all your inquiries in English
3.Working time: 8:00am ~17:00pm, Monday to Friday. (UTC+8)
4.Customized solution &Â perfect after-sale service
5. For large order, engineer can be sent to your country for on-site mainternace instructions.
6.Our advantage:1.Competitive price  2.Good quality  3.Timely delivery  4.New model launch yearly Â
                              5.Own manufacturing  6.own quality controlÂ
Contact us:
Tel:Â Â +86-510-86027183
Mob:Â Â +86-13921230558
Fax:Â Â +86-510-86027228
Web: www.jywuxing.com
The final product will be 40%-45% tire oil (fuel oil), carbon black and 35% carbon black, 10% steel and another 5-10% recycled gas (CH4-C4H10).
The main process is to pyrolyze the tire into oil and gas by directly heating the reactor;
The condenser or cooling tube will cool the gas to a liquid oil with the aid of circulating water;
Then, the remaining gas that cannot be cooled into liquid oil is recycled to the reactor heating system; after the oil and gas is completely discharged, the reactor is stopped to be cooled, and the reactor below 70 degrees is cooled; then the door can be automatically opened and the carbon black can be discharged. .
The capacity of each batch of products ranges from 5 tons to 20 tons.
LN-2200-6000 capacity 5-6 tons
LN-2200-6600 has a capacity of 7-8 tons
LN-2200-8000 has a capacity of 9-10ton
LN-2600-6600 has a capacity of 10-12ton
LN-2600-8000 has a capacity of 12-14ton
LN-2800-6000 capacity is 10-12ton
LN-2800-6600 has a capacity of 12-14 tons
LN-2800-8000 capacity is 15-20ton
If cut into small pieces, it can handle more.
Rubber Product Making Machinery
Latest Black Oil Refinery Machine,Used Oil Recycle to Diesel Machine,Latest Black Oil Distillation Machine,Waste Oil Recycle Machine
Henan Lanning Technology Co., Ltd , https://www.lanningrecycling.com