Â
ASME B16.5 .B16.47. B16.36.BS.MSS.AWWA | ||
Type | Weld Neck flange , Lap Joint Flange , Threaded flange, Socket Welding Flange,   Blind Flange,  Slip on Flange . |  |
Material | Stainless steel , Alloy steel.. Duplex/Super Duplex, Aluminum |  |
Size | 3/4"-60" | Â |
Pressure | 150#,300#,600#.900#,1500#,2500# | Â |
Technics | Forged, | Â |
Connection | welding | Â |
Sealing surface | FF RF M F M TG RJ |  |
Surface treatment |
Anti-rust Oil, |  |
Producing process | Billet-cutting-forging-heating-lathe-drilling-inspection-marking-packing-export-din flange |  |
Application Fields | Chemical Industry /Petroleum Industry /Power Industry/Metallurgical Industry Building Industry /Ship-building Industry |
 |
Supply Capacity | 8000tons  per  year |  |
Min Order Quantity | 1 ton |  |
Inspection | factory in-house self check or Third Party inspection |  |
PACKING | plywood cases, pallets, nylon bags or according to the customers' requirements,plastic cap |  |
Delivery | It is generally Within 25 days after receiving your payment |  |
TRADE TERM | FOB, CNF&CFR, CIF |  |
PAYMENT | TT or L/C |  |
CERTIFICATES | ISO-9001/2000,PED,ABS.TUV.DNV |
Flange
1. Application:
For seal or connect of pipe/tub-e lines
2. Material:
304,304L,316,316L,carbon steel or other material on request
3. Standard:
ANSI,DIN,JIS,BS,EN1092-1
4. Size:
DN15 (1/2") to DN5000 (200")
5. Type:
Threaded Flanges, Socket Welding Flanges, Blind Flanges, Other Flanges
Â
Types' Specification
Welding neck
1, Preferred for high-pressure, subzero or elevated temperature
2, Hub is tapered and bored to match pipe's inside diameter so flow is not restricted, preventing turbulence and reducing erosion
3, Easily radiographed and provides excellent stress distribution
Slip-on
1, Not normally used in high-stress applications due to low hub and weld attachment
2, Silps over outside of pipe
3, Inside of flange welded at hub and end of pipe
Lap joint
1, Used where bolt alignment or access for cleaning is required
2, Similar to slip-on flange when used with lap joint stub end
3, Radius at intersection of flange face and bore to match lap joint stub end
Threaded
1, Used where welding would would be hazardous
2, Designed for low-pressure and non-cyclic applications
3, Bore is threaded to match pipe thread
4, Tapered to seal pipe and flanges
Socket welding
1, For small-diameter chemical processes, hydraulic and stream distribution lines
2, Similar to slip-on flange
3, Counter bore matches pipe bore, allowing unrestricted flow
4, Counter bore from hub side fits pipe's outer diameter -  can insert pipe in socket with fillet weld at hub
Blind
1, Used to close ends of piping
2, Has no bore
3, Permits access to sealed lines
Other flanges
Orifice, Expander, Reducing, Lightweight, Studding Outlets, Long Weld Necks,Metric, Navy Drawings, Customer Drawings
Any Requests you can contact us for catalogues. Thanks.
 Description
Â
ASME B16.5 .B16.47. B16.36.BS.MSS.AWWA | ||
Type | Weld Neck flange , Lap Joint Flange , Threaded flange, Socket Welding Flange,   Blind Flange,  Slip on Flange . |  |
Material | Stainless steel , Alloy steel.. Duplex/Super Duplex, Aluminum |  |
Size | 3/4"-60" | Â |
Pressure | 150#,300#,600#.900#,1500#,2500# | Â |
Technics | Forged, | Â |
Connection | welding | Â |
Sealing surface | FF RF M F M TG RJ |  |
Surface treatment |
Anti-rust Oil, |  |
Producing process | Billet-cutting-forging-heating-lathe-drilling-inspection-marking-packing-export-din flange |  |
Application Fields | Chemical Industry /Petroleum Industry /Power Industry/Metallurgical Industry Building Industry /Ship-building Industry |
 |
Supply Capacity | 8000tons  per  year |  |
Min Order Quantity | 1 ton |  |
Inspection | factory in-house self check or Third Party inspection |  |
PACKING | plywood cases, pallets, nylon bags or according to the customers' requirements,plastic cap |  |
Delivery | It is generally Within 25 days after receiving your payment |  |
TRADE TERM | FOB, CNF&CFR, CIF |  |
PAYMENT | TT or L/C |  |
CERTIFICATES | ISO-9001/2000,PED,ABS.TUV.DNV |
Flange
1. Application:
For seal or connect of pipe/tub-e lines
2. Material:
304,304L,316,316L,carbon steel or other material on request
3. Standard:
ANSI,DIN,JIS,BS,EN1092-1
4. Size:
DN15 (1/2") to DN5000 (200")
5. Type:
Threaded Flanges, Socket Welding Flanges, Blind Flanges, Other Flanges
Â
Types' Specification
Welding neck
1, Preferred for high-pressure, subzero or elevated temperature
2, Hub is tapered and bored to match pipe's inside diameter so flow is not restricted, preventing turbulence and reducing erosion
3, Easily radiographed and provides excellent stress distribution
Slip-on
1, Not normally used in high-stress applications due to low hub and weld attachment
2, Silps over outside of pipe
3, Inside of flange welded at hub and end of pipe
Lap joint
1, Used where bolt alignment or access for cleaning is required
2, Similar to slip-on flange when used with lap joint stub end
3, Radius at intersection of flange face and bore to match lap joint stub end
Threaded
1, Used where welding would would be hazardous
2, Designed for low-pressure and non-cyclic applications
3, Bore is threaded to match pipe thread
4, Tapered to seal pipe and flanges
Socket welding
1, For small-diameter chemical processes, hydraulic and stream distribution lines
2, Similar to slip-on flange
3, Counter bore matches pipe bore, allowing unrestricted flow
4, Counter bore from hub side fits pipe's outer diameter -  can insert pipe in socket with fillet weld at hub
Blind
1, Used to close ends of piping
2, Has no bore
3, Permits access to sealed lines
Other flanges
Orifice, Expander, Reducing, Lightweight, Studding Outlets, Long Weld Necks,Metric, Navy Drawings, Customer Drawings
Any Requests you can contact us for catalogues. Thanks.
Â
NINGBO RUICAN MACHINERY COMPANY is a professional supplier for casting and machined part which is widely used for Automobile, Medical, earthmover, petroleum, electricity Industry, and in long-term business with foreign customers from North America and west Europe, we are exactly know what's the customer requirement when they provide drawings and material specification. And our engineering dept. can suggest the best process and technology to make the component or any design changing if necessary. Most of our products are exported to Canada, USA, and west Europe Germany, France, Denmark, Italy, Norway,Turkey, Finland, Switzerland, etc. and win good reputation among our customers.
NINGBO RUICAN MACHINERY COMPANY cover different foundries and machining factories based on different casting process: Investment Casting, Sand Casting and pressure Die Casting, gravity casting, as well as precision machining with CNC machines.
NINGBO RUICAN MACHINERY COMPANY produces various Agricultural Machinery Parts according to the clients' technical drawings or samples.Various materials can be used,such as grey iron,ductile iron,carbon steel,steel alloy,stainless steel,aluminium,brass and so on.
Agricultural Machinery Parts,Ductile Iron Agricultural Machinery Parts,Agriculture Machinery Spare Parts,Agricultural Parts Farm Machinery
Ningbo City Yinzhou Ruican Machinery Co.,Ltd , https://www.factoryforging.com