Analysis of the Four Bottlenecks in China's Metrological Instrumentation Industry

Analysis of the Four Bottlenecks in China's Metrological Instrumentation Industry In today's information age, competition in the industry is very fierce. If you slow down the pace of development, you will be left behind. However, the domestic level of metering and instrumentation industry has been slow to develop. Large and high-end equipment and equipment are almost all dependent on imports. Many urgently needed special instruments are still blank. There are still many difficulties in ensuring the quality of middle and low-end products. The delay in the development of technological innovation and industrialization is a “bottleneck” that restricts the development of China's metrological instrumentation industry.

China has become the second largest metering instrument and meter producer in Asia except Japan. The general situation of China's metrology and instrumentation industry is moving forward. The products keep pace with international development in the direction of miniaturization, integration, intelligence, and bus, but different factors also restrict the development of meter industry. Shangpu consulted the electronics industry analyst pointed out: At present, the development status of China's metering equipment is roughly the complete range, the small scale of the company is inefficient, and the product level is low. The development of China's instrumentation industry lags behind and there are many problems and it is facing a severe situation.

There are three main factors that restrict the development of China's metrological instrumentation industry: First, in today's information age, industry competition is fierce. If you slow down the development rate a bit, you will be left behind. However, the level of China's metrological instrumentation industry has slowed down, and large-scale and high-end equipment and equipment are almost all dependent on imports. Many urgently needed special-purpose instruments are still blank. There are still many difficulties in ensuring the quality of middle and low-end products. The delay in the development of technological innovation and its industrialization is a bottleneck restricting the development of China's metrological instrumentation industry. Second, China's measurement instruments, although the gap between the technical indicators and similar foreign products is not very large, but the stability and reliability are not high. This has greatly limited the scope and credibility of China's metered products. Third, the development of the metrology instrumentation industry has also been constrained by four major objective environments. On the one hand, taxation is too heavy; on the other hand, the relevant departments lack understanding of the importance of the development of measurement products industry, and support is insufficient; third, the lack of procurement policies to support the development of national industries. Fourth, China's basic industry capability is poor. Including product quality, service ability and reputation ability are all poor, which directly affects the development of the industry.

The general situation of the domestic measurement instrumentation industry is moving forward. The products keep pace with international development in the direction of miniaturization, integration, intelligence, and bus, but different factors also restrict the development of meter industry. The development of China's metrological instrumentation lags behind, there are many problems, facing a severe situation, and its main factors are concentrated in the following four aspects:

I. Slow progress in technological innovation and industrialization

Modern metrology is a highly integrated product of optical, mechanical, electrical, computer, and many other basic disciplines. It is very sensitive to new technologies and is one of the fastest-growing new technology applications in modern industrial products. With the launch of new products, especially in the information age today, the competition is becoming increasingly fierce and a slight slowdown in the pace of development will be far behind. Now that we have entered the 21st century, the general level of China's metrology and instrumentation still remains at the international level in the early 1980s. Large-scale and high-end equipment and equipment are almost all dependent on imports. Many urgently needed special equipment and equipment are still blank. There are many difficulties in ensuring quality that need to be overcome. The delay in the development of technological innovation and its industrialization is a "bottleneck" restricting the development of China's metrological instrumentation industry. There are three main factors constraining China's scientific and technological innovation and development delay in the metrological instrumentation industry: First, serious shortage of scientific research funds; The second is the lack of talent; the third is the lack of effective integration of government, production, education, research, and application.

Second, product stability and reliability cannot be fundamentally solved in the long term

China's measurement products, including industrial automation instrumentation systems, communications equipment, etc., although the gap between the technical indicators and similar foreign products is not very large, but the stability and reliability are not high. This has greatly limited the scope of use and credibility of China's metrology products. There are three main reasons for this:

(1) Long-term neglect of the development of basic technology research.

(2) The quality of domestically produced common parts and basic parts is not critical.

(3) The quality control and management of the company's products are weak, and the quality of the products is not relevant.

Third, the old system constrains the development of the enterprise

The old system is a common issue that restricts China’s economy, especially the development of state-owned enterprises. The instrument industry is no exception. A considerable number of state-owned enterprises have been unable to break away from their historical burden due to the long-term constraint of the old system, lost their vitality in the market competition, and suffered a serious downturn in their production and operations. A large number of state-owned enterprises are struggling on the life and death line. Therefore, accelerating institutional reform is one of the important ways for development.

Fourth, the development of the metrology instrumentation industry is constrained by the objective environment. Its main performance is

(1) Taxes are too heavy. The enterprises for measurement products are generally small in scale, with few production batches, and the total output value and economic benefits are not high. However, modern metering instruments and meters have enormous inflated effects on the national economy and produce incalculable double benefits. For industries with such special properties, 17% of VAT is levied just like other industries, and 33% of income tax and the same percentage of tariffs are overtaxed.

(2) The governments at all levels, including the industry's competent authorities and the banking, taxation, and industry and commerce departments, have insufficient understanding of the importance of developing the metrology products industry, and their support is insufficient.

(3) The lack of procurement policies to support the development of national industries.

(4) Poor basic industry capabilities in China. Including product quality, service ability and reputation ability are all poor, which directly affects the development of the industry.

Garbage Bag On Roll

Be made of high-quality HDPE or LDPE material, the Garbage Bag on Roll is with strong toughness and easy to wrap around garbage can. Ideal for waste containment in washrooms, kitchens, hotel rooms and food halls. Our Trash Bags are made of high-quality polyethylene, widely used in people's daily life, supermarket,office,hospital, hotel and restaurant and so on. Their measurement, color, printing and packing could be according to your specific requirements.

Garbage Bag

Dustbin Bag

Bin Lines, Garbage Bag Roll, Trash Bag Roll, Roll Of Garbage Bags, Recyclable Trash Bags, Dustbin Bags, Hefty Recycling Bags

BILLION PLASTIC MANUFACTURING CO.,LTD, JIANGMEN , https://www.jmtrashbag.com