After the mine is in the on-load operation, the operator must observe and pay attention to the following:
(1) The ore must be uniform and the product size meets the requirements.
(2) Pay attention to the operation of the mining and transportation belts at any time to avoid blockage accidents.
(3) Always check the oil pump, cooler, filter and oil temperature, the oil return temperature should not exceed 60 °C.
(4) Check the water-tight drain of the water seal. If there is no water, it is not allowed to run.
(5) Pay attention to check the oil pressure of the lock cylinder. The adjustment ring must be operated under the locked state.
(6) Regularly check the wear of the lining, pay special attention to the lining fixing bolt on the adjusting ring. If it is loose, it will cause the lining to loosen. The new lining should be parked once after 24 hours of work.
The CK series numerical control cnc lathe machine bed adopts integral structure and strong rigidity: guide rail is treated by medium frequency quenching and precision grinding, which is wear-resistant.
Max swing over bed is 500mm; Max turning diameter is 260mm; Max length of workpiece is 2000mm.
Different specification and requirements are available for customization.
CNC Machine, Automatic Machine Tool, Automatic Lathe, CNC Lathe, numerical control machine
Yuxi JianFu Group Machine Tool Co., Ltd. , https://www.yucymachine.com