Blind flange is used to close ends of piping systems. It is a kind of round plate with no center hold but with all the proper bolt holes. This blind flange is available in various sizes and materials and is used to provide positive closer on the ends of pipes, valves or equipment nozzles. This flange helps in easy access to a line once it has been sealed. The blind flange is sometimes custom made or machined to accept a nominal sized pipe to which reduction is being made. This reduction can be a threaded reduction or welded reduction.
2. Features of blind flanges: Some important features of blind flanges are as follows:
Blind flanges are sometimes supplied with NPT fittings which allow pressure test connections to be fitted.
They are used to blank off the ends of pipe.
They are also used to blank off the ends of valves and pressure vessel opening.
Considering factors like internal pressure and bolt loading, blind flanges, especially in the larger sizes, are the most highly stressed of all types of flanges.
Since the maximum stresses in a blind flange are bending stresses at the center, they can safely be allowed to be higher than in other types of flanges.
Blind flanges are made to fit standard pipes in all sizes.
3. Blind flange material
Stainless Steel: ASTM A 182, A 240
Grade: F304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L, Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750
Carbon Steel: ASTM A 105, ASTM A 181
Alloy Steel: ASTM A 182, GR F1, F11, F22, F5, F9, F91
Nickel Alloys: Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276
Copper Alloys: Copper, Brass & Gunmetal
Size: 1/8" NB TO 48"NB.
Class: 150#, 300#, 400 #, 600#, 900#, 1500# & 2500 #.
4. Blind flange standard
ANSI: ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
DIN: DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
B. S: BS4504, BS4504, BS1560, BS10
| Â Â Â Â Â Â Â Â Â Â Â Â Â Descriptions |
      Size |                                    Remarks |          Pictures |
|||||
| Elbow | 45°/60°/90°/180°  |
1/2"-80" | Standard:Â Â ANSI;Â BS;Â JIS;Â DIN;Â MSS;Â etc | Â | ||||
| Â Â Flanges |
PL/SO/WN/SW/BL/IF | Â Â 1/2"-80" |
Material: Carbon steel; Stainless steel; Alloy steel;  Cast iron; etc |
 | ||||
| Reducer | CON/ECC Â |
  1/2"-80" |
Structure Technique: Forged and casting flanges.                 |
 | ||||
| Tees | Equal/reducer | Â Â 1/2"-80" |
Surface Coating technique: Sand Blast; Lacquering; |  | ||||
| Nipple | Threaded/Hex/ Round | 1/2"-80" | Surface finishing: black, electro-galvanized, hot-galvanized  |
 | ||||
| Union | Male/female | 1/8"-6" | Pressure:3000#-9000# | Â | ||||
| Outlet | Weldolet/threadolet/socko let | 1/8"-6" | Standard:MSS SP-97 |  | ||||
| Cap | BW CAP | 1/2"-48" | Best price&high quality |  | ||||
| Coupling |  SW/Threaded | 1/8"-6" | PLE;PSE;TLE,BSE;TOE |  | ||||
| Plug | Square/hex/round | 1/8"-4" | Large QTY&Lower price |  | ||||
| Bushing | Round/Hex/Flush | 1/8"-4" | Pressure:3000#-9000# | Â | ||||
| Swaged nipple | Threaded/Plain | 1/8"-4" | SCH10S-SCH80 |  | ||||
Blind flange is used to close ends of piping systems. It is a kind of round plate with no center hold but with all the proper bolt holes. This blind flange is available in various sizes and materials and is used to provide positive closer on the ends of pipes, valves or equipment nozzles. This flange helps in easy access to a line once it has been sealed. The blind flange is sometimes custom made or machined to accept a nominal sized pipe to which reduction is being made. This reduction can be a threaded reduction or welded reduction.
2. Features of blind flanges: Some important features of blind flanges are as follows:
Blind flanges are sometimes supplied with NPT fittings which allow pressure test connections to be fitted.
They are used to blank off the ends of pipe.
They are also used to blank off the ends of valves and pressure vessel opening.
Considering factors like internal pressure and bolt loading, blind flanges, especially in the larger sizes, are the most highly stressed of all types of flanges.
Since the maximum stresses in a blind flange are bending stresses at the center, they can safely be allowed to be higher than in other types of flanges.
Blind flanges are made to fit standard pipes in all sizes.
3. Blind flange material
Stainless Steel: ASTM A 182, A 240
Grade: F304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L, Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750
Carbon Steel: ASTM A 105, ASTM A 181
Alloy Steel: ASTM A 182, GR F1, F11, F22, F5, F9, F91
Nickel Alloys: Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276
Copper Alloys: Copper, Brass & Gunmetal
Size: 1/8" NB TO 48"NB.
Class: 150#, 300#, 400 #, 600#, 900#, 1500# & 2500 #.
4. Blind flange standard
ANSI: ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
DIN: DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
B. S: BS4504, BS4504, BS1560, BS10
| Â Â Â Â Â Â Â Â Â Â Â Â Â Descriptions |
      Size |                                    Remarks |          Pictures |
|||||
| Elbow | 45°/60°/90°/180°  |
1/2"-80" | Standard:Â Â ANSI;Â BS;Â JIS;Â DIN;Â MSS;Â etc | Â | ||||
| Â Â Flanges |
PL/SO/WN/SW/BL/IF | Â Â 1/2"-80" |
Material: Carbon steel; Stainless steel; Alloy steel;  Cast iron; etc |
 | ||||
| Reducer | CON/ECC Â |
  1/2"-80" |
Structure Technique: Forged and casting flanges.                 |
 | ||||
| Tees | Equal/reducer | Â Â 1/2"-80" |
Surface Coating technique: Sand Blast; Lacquering; |  | ||||
| Nipple | Threaded/Hex/ Round | 1/2"-80" | Surface finishing: black, electro-galvanized, hot-galvanized  |
 | ||||
| Union | Male/female | 1/8"-6" | Pressure:3000#-9000# | Â | ||||
| Outlet | Weldolet/threadolet/socko let | 1/8"-6" | Standard:MSS SP-97 |  | ||||
| Cap | BW CAP | 1/2"-48" | Best price&high quality |  | ||||
| Coupling |  SW/Threaded | 1/8"-6" | PLE;PSE;TLE,BSE;TOE |  | ||||
| Plug | Square/hex/round | 1/8"-4" | Large QTY&Lower price |  | ||||
| Bushing | Round/Hex/Flush | 1/8"-4" | Pressure:3000#-9000# | Â | ||||
| Swaged nipple | Threaded/Plain | 1/8"-4" | SCH10S-SCH80 |  | ||||
At our factory outlet, we offer a wide range of hot-selling graphite moulds for casting. These moulds are manufactured using high-quality graphite materials, ensuring durability and long-lasting performance. Our graphite moulds are designed to withstand high temperatures and provide excellent dimensional accuracy for producing high-quality castings.
Some of our popular graphite moulds for casting include:
1. Graphite Ingot Moulds: These moulds are used for casting metal ingots, such as gold, silver, and other precious metals. They come in various sizes and shapes to accommodate different casting requirements.
2. Graphite Crucibles: Crucibles are essential for melting and pouring molten metal into moulds. Our graphite crucibles are highly resistant to thermal shock and have excellent heat retention properties.
3. Graphite Dies: Dies are used for casting complex shapes and intricate parts. Our graphite dies are precision-machined to ensure accurate and repeatable casting results.
4. Graphite Plates: Plates are used for casting flat or thin metal parts. Our graphite plates are available in various thicknesses and sizes to meet different casting needs.
5. Graphite Rings: Rings are commonly used for casting cylindrical or round-shaped metal parts. Our graphite rings are highly durable and can withstand high temperatures and pressures.
All our graphite moulds are carefully crafted to meet the highest quality standards. They undergo rigorous quality checks to ensure they are free from defects and can provide consistent and reliable casting results.
If you are looking for high-quality graphite moulds for casting, visit our factory outlet to explore our wide range of hot-selling products. Our knowledgeable staff will assist you in finding the right moulds for your specific casting requirements.
Graphite Mould,Graphite Bar,Graphite Plate Sheets,Graphite Ingot Mould
Yixing Xingfeng Carbide Mould Co.,LTD , https://www.xfcarbidemould.com