After the wireless bridge is installed, the operation is smooth and the image is clear. This wireless monitoring system probably means a successful build. Basically, if it is installed correctly, the wireless transmission device wireless bridge of Laion can operate stably. Inevitably there will be a crash in some projects. As soon as this happens, most people think that it is a problem of wireless bridges. This is a lot of accountability.
Lean wireless bridge quality is excellent, the hardware is fully able to withstand the test, the cause of the crash may be caused by other aspects, and even some small details. Let's introduce how to deal with when a crash occurs.
1, first check the wireless bridge settings
When there is a crash, do not panic, to investigate the cause, find the right reason to prescribe the right medicine.
Look at the signal strength and CCQ of the wireless transmission equipment in the settings. If it is normal, scan again for nearby interference sources or IP collisions. If there is no interference, then go from other areas.
2, check whether the switch configuration meets the requirements
Ryan Technologies will always emphasize the importance of switches when it comes to configuring a list of customers. Yes, in a wireless monitoring system, the switch plays a crucial role. If you choose not to, it will affect the normal operation of the entire wireless monitoring system. Some low-end switches cannot meet the requirements of data transmission at all and cause commodity blocking during data transmission. In this case, the video image can be checked by not connecting the switch. Whether there are still crashes, dropped packets, etc. If it is normal, then it is definitely a problem with the switch.
3, check whether the total bandwidth of wireless transmission equipment is overloaded
Under normal circumstances, when the Lean scientific and technical personnel provide the plan, they will select the equipment according to the site environment and recommend the most appropriate equipment for the customer in the normal transmission of the image. However, some customers do not operate according to requirements. In order to save costs and reduce reception, the wireless bridge at the receiving end is overloaded, resulting in crashes and dropped calls.
Guillotine Shear
The machine used is called a squaring shear, power shear, or guillotine. The machine may be foot powered, less commonly hand powered, or mechanically or hydraulically powered. It works by first clamping the material with a ram. A moving blade then comes down across a fixed blade to shear the material.
Metalworking guillotines operate by a clamp securing the sheet of material. Similar to the action of scissors, the blade shears the material, starting at one side of the sheet. ...... In hydraulic guillotines, energy for the tool comes from pressure in a hydraulic ram.
Guillotine Shear Machine,Guillotine Shear For Metal,Guillotine Shear For Sale,New type Guillotine Shear
Jiangsu Hoston Machine Tools Co., Ltd. , https://www.hosdunmachinetools.com
