The speed-passing gate swing gate is also considered as a kind of pedestrian passage gate in the practical life application. Although the speed-passing gate swing gate is beautiful and beautiful, the traffic speed is also fast, but when purchasing the speed-pass gate swing gate Our procurement staff still needs to know some questions, the choice of speed gate swing gate:
1. From the material point of view: the speed-passing gate swing gate is used for pedestrian traffic management, and the long-term operation and anti-collision capability of the gate should be considered in various places. Therefore, it is necessary to use 304 stainless steel material. of. The door panels are made of soft materials. When people enter the gates, they may hit the gates. All soft materials will not cause scratches.
2, the bar code reader above the card reader window selection, most manufacturers still use acrylic material. Acrylic material is convenient and low in cost; easy to process and install, but after many times of brushing, acrylic will wear rough, affecting the reading speed and accuracy of the barcode, and will also affect the appearance of the appearance. Therefore, the research and use of wear-resistant quartz glass; not tight appearance looks good; and wear-resistant super strong!
3. Ticket inspection speed: In the case of large traffic flow, the speed of ticket inspection is a very important indicator. For example: at a subway station, at a scenic spot or at a bus stop. The traffic volume of these places is relatively large, and if the ticket inspection speed is not fast enough, it will affect the management efficiency of the entire site. The ticket inspection speed depends on the control mode on the gate, and the research and development gate uses a military-grade encoder to control the mechanical movement speed. Generally, the gate response speed is within 300ms.
4. Fault-free operation life: The speed-passing gate swing is driven by the motor, and the life of the Zhonghao motor will not be less than 8 million times.
For KOMAISU Cylinder Seal Kit
Precautions for installation of hydraulic cylinder sealing kit
1.Before installation, carefully check whether the model and specifications of the sealing kit match the hydraulic cylinder, and whether there is any damage or deformation.
2.Before installing the sealing kit, the interior of the hydraulic cylinder should be cleaned thoroughly and checked for foreign objects, sand particles, and other impurities to avoid affecting the sealing effect.
3.When installing the sealing kit, special tools should be used to avoid using hard metal tools or manual tools to avoid damaging the sealing kit.
4.When installing sealing kits, attention should be paid to the direction and position to ensure that each sealing kit is installed correctly to avoid leakage or poor sealing.
5.When installing the sealing kit, attention should be paid to applying lubricating oil or lubricant to make it easier to install and improve the sealing effect.
6.After installing the sealing kit, pressure testing and running should be carried out to ensure the sealing effect and the normal operation of the hydraulic system.
For Komaisu Cylinder Seal Kit,Tightening Cylinder Repair Kit,Kobelco Cylinder Seal Kit,Travel Motor Seal Repair Kit
Safe Seal Technology Co., Ltd. , https://www.jsspreals.com