Reasonable wiring can weaken the intensity of interference signals to a considerable extent. When wiring, the control lines of various devices should be as far away as possible from the input and output lines of the inverter. In the space, the control line should cross the input and output lines of the inverter as far as possible, and it is better to cross vertically.
To reduce the interference from the source to the reactor or filter, for low-power inverters, the cost is higher. We use a low-cost electromagnetic interference suppression method: the motor cable is passed through the ferrite ring, so that part of the wire is passed through The impedance increases locally, preventing electromagnetic interference currents from passing through. If the wire is wound a few times around the ferrite ring, the total inductance and impedance will increase with the square of the number of turns. The motor cable can pass through the ferrite ring three times. However, it should be noted that the ground wire connecting the motor and the frequency converter should be left outside the ring.
Shielding the line The connection line between the inverter and the motor should be penetrated into the metal pipe as much as possible. The metal pipe should be grounded. The signal line shielding layer can only be connected to one end or the other, and must not be connected at both ends.
The grounding wire should be as thick as possible. The grounding point should be as close as possible to the inverter; the grounding wire should be as far away as possible from the power cord; the ground wire used by the inverter must be separated from the ground wire of other equipment; grounding of all equipment must be absolutely avoided. After connecting the wires together, the ground terminal of the inverter cannot be connected to the neutral wire of the power supply;
Electric vehicles are the development direction of future transportation vehicles, which have the characteristics of environmental protection and low-carbon, and can reduce exhaust emissions and environmental pollution.
An electric vehicle is a type of vehicle that uses electrical energy as its power source. Compared to traditional internal combustion engine vehicles, electric vehicles have lower energy consumption, lower pollution emissions, and lower noise. With the increasing awareness of environmental protection and the development of technology, electric vehicles have become an important choice for solving energy problems and alleviating environmental pollution.
Electric Mini Car,Pure Electric Small Car,Mini Electric Vehicle,Pure Electric Vehicle
Chongqing Huanyu Automobile Sales Company , https://www.cqhuanyuauto.com