How to use the input level transmitter for detailed introduction:
The input type liquid level transmitter is a commonly used transmitter product. According to the principle that the pressure of different specific gravity liquids at different heights is linear, the volume, liquid height and weight of water, oil and paste are realized. Accurate measurement and transmission. The input type liquid level transmitter is a commonly used transmitter product. According to the principle that the pressure of different specific gravity liquids at different heights is linear, the volume, liquid height and weight of water, oil and paste are realized. Accurate measurement and transmission.
1. Protect the ventilation cable. It should not be bent or blocked, and it should not be damaged. The excess cable can be folded nearby.
2 , the outdoor installation of the input level transmitter should also take lightning protection measures.
3. Select the regulated power supply to supply power separately. The stability of the power supply affects the performance of the transmitter, and its error is controlled to less than one-fifth of the allowable error of the transmitter. For products with special power requirements, special power supplies must be connected.
4. For the input type liquid level transmitter used in large fluctuations such as submersible pumps, install the steel pipe. The steel pipe should be fixed firmly. A hole should be opened at every interval on the steel pipe. The position of the steel pipe should be far away from the inlet and outlet.
5 , the junction box should be fixed firmly, or install a fixed bracket, to prevent dry, shaded places, can not be rained
6. The signal line of the input level transmitter should adopt a shielded cable to prevent electromagnetic interference.
7. Connect the transmitter according to the correct wiring method. The power-on time should be fifteen to thirty minutes.
8. If the input level transmitter is installed in a pool, water tower, etc., its probe can be submerged at the bottom of the water, away from the position where the water flow rate is too fast.
Wire Cut EDM is fast, effective, and can be used to machining virtually any electrically conductive metal material, including Bronze, Copper, Tungsten, Carbon graphite, Carbon steel, Stainless steel, High alloy steel, Hard alloy, Inconel, Kovar, Titanium and many others. Computer-automated CNC equipment and advanced CAD/CAM programming guarantee our Wire Cut EDM to meet even the tightest tolerances.
We have been developed to prove an ideal mix of Speed, Accuracy, Surface Finsh and Low electrode Consumption.
Single Cutting Wire Cut EDM,High Speed Wire Cut EDM,CNC Wire Cutting EDM Machine,EDM Wire Cut
Jiangsu Sailing Intelligent Equipment Co., Ltd. , https://www.sailingcnc.com