Large high-voltage submersible sewage pump is available in Changsha

In order to meet the needs of urban flood control and sewage (stain), and save the cost of pumping station project, the first batch of 10 600QW3000-40-500kW 10kV large-scale high-voltage dry operation jointly developed by Changsha Electric Machinery Co., Ltd. and Jiangsu University and Wuxi Water Pump Factory The submersible sewage pump has been put into use in the large-scale rainwater sewage pumping station of Angang, which has the largest installed capacity in China. Not long ago, the pump station resisted the typhoon and rain, and exerted the power of rapid sewage discharge, ensuring the normal and orderly production and production of Angang.

The new product has a high lift and a direct reach of 40 meters. The motor at its core is the first to adopt high voltage in China, and it has a dry-press structure inside, which has reliable performance and high efficiency. The product is integrated with the water pump, which eliminates the need for labor on site, and greatly simplifies the civil engineering and building structure of the pumping station, reduces the floor space, and saves the pump station construction cost by 30%. Its successful development not only fills the domestic gap, but also marks a new step in the production of large-scale submersible electric pumps in China.

CNC fiber laser cutting manchine is cutting-table structure designed machine with dual drive, effctive cutting range is from 1500mm to 6000mm. High-precision longitudinal and transverse linear rails drive high-precision helical gear and rack and it is available in speed up to 8000mm/min. Accelerated speed is 1G. Exchanging work tables are optional that optimize cutting productivity.

  Made in China CNC Fiber Laser Cutting Machine

1.Technical specifications  of CNC fiber laser Cutting Machine

Effective cutting length: 3000mm

Effective cutting width:1500mm

Max. speed:10000mm/min(returning speed)

CNC system:FSCUT

Laser generator:RFL-1000(Domestic sharp branch)

Smoke purification device: CCQ-9000

Cutting torch: 1group( Cyplite )

Torch THC:BCS100,elevating distance≥100mm

2.cutting speed parameter of  CNC fiber laser cutting machine

The laser power and the cutting material thickness under certain conditions,

cutting speed varies with the composition of the material, specifically the ability 

 of different sheet metal cutting table below (for reference).

 

thickness

(mm)

speed

(mm/min)

pressure

(MPA)

thickness

(mm)

speed

(mm/min)

pressure

(MPA) 

 

 

 

1000W

 

1mm

12000

0.6

1mm

15000

1.6

2mm

6000

0.6

2mm

5400

2.0

3mm

3600

0.5

3mm

1800

2.3

4mm

2700

0.4

4mm

1100

2.5

6mm

1200

0.15

 

 

 

8mm

960

0.13

 

 

 

10mm

600

0.13

 

 

 

 

3.RFL-1000 performance parameters of the fiber laser

parameter

RFL-1000

 rated input voltage

220±10%VAC

modulation frequency

50kHZ

wave length

915nm

 laser power

1000W

power consumption

<2kW

Size (length X width X height)

485mm X 237mm X 663mm

weight

<50Kg

gas

Air: 9 oxygen bar: 8 bar nitrogen: 27 bar

CNC Fiber Laser Cutting Machine

CNC Fiber Laser Cutting Machine,CNC Fiber Laser Cutter,CNC Fiber Laser Cutting Machinery,CNC Fiber Laser Router

SHIJIAZHUANG LONGXUAN TRADING CO., LTD , http://www.longxuanmachine.com