The Tomb of Luoyang's Tomb Raider is hidden
“Now, there are fewer people doing this (tomb), and most of them go out to work. There is also an excavator in the area to excavate rocks. Every night someone will stay in the mountains to guard excavators, and the public security department will continue to patrol. Ah Kee said that it can be done, but it is best to select the right time. It is best to start the first two days of the rain. After doing this, there will be nothing left and no accident.
Beware of contact with cultural property sellers
"We can feel that we have done this in a strange way. We have come to strangers in the village, especially those who sell artifacts, and we will be more careful. Even if we come into contact with them, we will not give them real things." .
After stealing the baby, hurry to "sell"
"If you want to become an 'old robber', you must first become a feng shui gentleman, not to see how good feng shui can find a good grave?" Ah Kee said that ancient funerals pay attention to feng shui, especially for wealthy people. “Only when you learn to look at feng shui and eyesight is it possible to discover the tombs with 'baby' inside.†Ah Kee said that there were “old robbers†in the village before, but now the well-known “old thief†in this area has basically passed away like him. There are not many people who have such eyesight. However, now that you are quasi-advisable, you can't do anything like this. “Are you afraid to do it?†said Ah Kee. People in the village basically go out to work. Some former “Kanjiazi†are not at home now. "This place has more good things to do with robbers, but now they are all shot." Ah Kee told reporters: Most of them are foreigners to buy ", and some of them are acquired by acquaintances." Says that these tombs are mostly made of bronze and jade. As for pottery, unless they are intact, they will be thrown away. "These babies are simply not exposed, especially when they get good things. They will not talk to others unless they are in place." Ah Kee said.
Looking for ancient tombs with "pay attention to"
“Why did we say that our location is important here? Because there are a lot of treasures underneath this, the baby of the Han Dynasty.†Ah Kee said that he had liked to play on the mountain since he was a kid and he heard that someone “played mineâ€. Slowly, he became very familiar with this business. He told reporters that robbers generally have to follow four procedures to find and enter ancient tombs.
Look at feng shui
Tombs, we must first see where there are tombs, or like a needle in a haystack. “Look at the feng shui, in fact, it is looking for ancient tombs. Our place has always been feng shui since ancient times. Especially for building houses and selecting cemeteries, basically we have to find a famous Feng Shui to see.†Ah Kee said, according to It is common sense that when ancient communists chose cemeteries, they would choose where the feng shui was good, especially for powerful and powerful families. Their graveyards were even more so. Therefore, only by knowing feng shui can you be sure to look at the cemetery.
Grave
Ah Kee told reporters that feng shui looked almost the same, and began to survey the tomb. You can use the probe to probe first. After the determination, you can use the shovel to see the depth and the things brought out on the shovel. Sawdust, cinnabar, pit ash, etc. are the main basis for judging whether there are ancient tombs or not. “Our side of the tomb is basically It is a pit ash. Most of the small tombs of the ancient tombs on the settlement side are cinnabar. These are protective measures to prevent water seepage."
Pirates the hole
After finding the grave, use a trowel to dig out the shape of the grave, that is, "fixed position." One hit on the left, ten meters did not hit, that is "passed", then go back to the right to continue to play, and so on, one by one point together, is the shape of a tomb more than ten meters underground. Then, according to the characteristics of the tomb's shape, depth, pit ash and material (wood, stone, brick), the tomb's age, tomb gate position, etc.
Into the grave
“The ancient tombs here are generally ten meters deep, and they are deeper. Once the shaft is dug up, people will light up when they enter the cross-hole and go to the chamber.†Ah Kee said that the tombs are very long, although now Flashlights and batteries are more convenient, but the deeper pits also use torches. Once the torches are destroyed in the tombs, it means that people can suffocate and they should quickly come out.
CCD Cnc Router with Visual system with Camera for Sign Board Cutting, Print image edge cutting, Versio.
Introduction:1) Cnc Router With Ccd Vision Router System is among the most versatile CNC machining systems you will find on the market. The T-slot bed makes it very easy to place the sheet stock down for cutting and routing, and even setup custom jigs, fixtures and clamps for parts marking applications.
2) It can produce accurate, repeatable, cost-effective work in considerably less time than it takes to do t he same work by hand. Featuring our state-of-the-art Vision Controller and our graphically advanced Vision software, this machine is perfect for a wide variety of applications including milling, drilling, contouring, and routing.
3) Application for Routing out wood signs, Cutout letters, Control panels, Cutting out sheets of material and 3D signs in sign foam, wood and more!
Camera
The machine comes with a camera to realize the Vision function.
High Frequency Powerful spindle
The High quality UTECH R2 series Cnc Router Machine comes standard with 3.5kw high frequency spindle. This precision spindle requires no maintenance. Fully programmable speeds from 6000 to 24000 RPM, more powerful and less noise.
Drive Motors
Patent design 1:4 gear reducer install on the driving motor, makes the motor is more powerful, and having a longer time service life.
The stepper motors are installed on all axes to ensure precise positioning of the gantry and the spindle in accordance with a predetermined program at high speed. Stepper motors are well proven high degree of reliability.
The machine is installed 4 pieces of motors.
UTECH Patent pressing clamp
The patent design pressing clamp is convenient for the user to assemble and disassemble the material.
XYZ ASK Square Guide Rail(German)+Flange slider
HIGH PRECISION LINEAR GUIDE RAIL HIGH RIGIDITY OF [ASK" (German)
Due to the increased stability and rigidity provide high precision movement of the gantryand high-speed drilling spindles in X, Y, Z. achieved high machining accuracy and durability of the machine without loss of accuracy parameters.
Machine handpiece
The spindle is fixed on the high quality aviation aluminum T061/6063 plate, the plate is machined by high precision CNC machining center.
XY Helical Rack Gear(Germany)
Unlike gears with straight teeth, oblique engages gradually, not immediately over the entire length. Helical gearing has no zone-pair gearing. In spur gear the load on the teeth is applied instantly. The teeth in helical gears are loaded gradually as you approach them in the area of gear meshing is always at least two pairs of teeth
TBI High-Precision Ball-screw Transmission (Taiwan)
1. High transmission efficiency.
2. High transmission accuracy, smooth movement, no creep phenomenon. The ball screw drive is basically rolling friction, and the frictional resistance is small. The frictional resistance has almost no relation with the speed of movement.
3. There is no free travel in the reverse direction. After the ball screw and nut are pre-tightened, the axial clearance can be eliminated. In this way, there is no dead zone in the reverse direction, which can improve the axial transmission accuracy and axial stiffness.
Cnc Router With CCD
Cnc Router With Ccd,Cnc Engraving Router With Ccd,3D Cnc Router With Ccd,Cnc Router With Ccd Camera
Shandong U-May CNC Technology Co., Ltd. , https://www.fiberlasers.de