Shredding and Pelletizing System for All Types Plastic Recycling

The ASPTM series shredding and pelletizing system combines function of shredding, crushing, enforcing feeding, plasticization and pelletizing in one program.
 
 
Applied in the plastics recycling and pelletizing process, ASPTM system is a integrated and cost-saving solution for every kind of plastic scrap, such as film, raffia, trim, purge, hollow part, bottle and foaming material in plant recycling.
 
 

Shredding/Enforcing feeding
In collaboration with European shredders supplier, the specialized shredding rotors set to combine with single screw extruders, to pre-reduce, crush and enforcing feed various plastics scraps; the plastic scraps can be in form of film, bottles, raffia, woven bag/non-woven, fabrics, purges, lumps; it is a universal system for all kinds of plastic scrap, in any kind of condition.
 
 

 
Melt filtration
A regular single plate/piston double station screen changer or non-stop double plate/piston four-station screen changer can be installed on head of extruder to present significant filtration performance. The requirements on the filter technology depend heavily on the quality of input material as well as the planned use of granules.
 

 
Plasticization and degassing
A specialized single screw extruder applied to gently melt the crushed plastics scraps. The handled scraps shall be melted, plasticized on a 32D processing section. With double-zone vacuum degassing system, volatiles such as moisture and low-moleculars will be removed efficiency,especially suitable to heavy printed and moisture-sensitive plastics scraps re-pelletizing.
 
 

 
Pelletizing
Die-face water ring pelletizing system set as the standard granulating method in ASPTM  system. Self-adjusting pelletizing head for the best granulate quality and long using-life thanks to consistently correct blades pressure. RPM of rotatory blades is automatic based on melt extruding pressure.
 
 

Flowchart:

1. Belt conveyor
2. Hauling roller
3. Shredder
4. Extruder
5. Vacuum volatilization
6. Filtration unit
7. Water-ring pelletizing unit
8. Under water pelletizing unit
9. Strand pelletizing unit
10. Storage silo 

Specification: 
Advantage of Shredding and pelletizing system
Suitable to both light/heavy recycles;
Easier operation;
Intelligence: One-button start/stop;
Smaller space occupation;
Lower energy comsuption, 25% down;
 
 
The ASPTM series shredding and pelletizing system combines function of shredding, crushing, enforcing feeding, plasticization and pelletizing in one program.
 
 
Applied in the plastics recycling and pelletizing process, ASPTM system is a integrated and cost-saving solution for every kind of plastic scrap, such as film, raffia, trim, purge, hollow part, bottle and foaming material in plant recycling.
 
 

Shredding/Enforcing feeding
In collaboration with European shredders supplier, the specialized shredding rotors set to combine with single screw extruders, to pre-reduce, crush and enforcing feed various plastics scraps; the plastic scraps can be in form of film, bottles, raffia, woven bag/non-woven, fabrics, purges, lumps; it is a universal system for all kinds of plastic scrap, in any kind of condition.
 
 

 
Melt filtration
A regular single plate/piston double station screen changer or non-stop double plate/piston four-station screen changer can be installed on head of extruder to present significant filtration performance. The requirements on the filter technology depend heavily on the quality of input material as well as the planned use of granules.
 

 
Plasticization and degassing
A specialized single screw extruder applied to gently melt the crushed plastics scraps. The handled scraps shall be melted, plasticized on a 32D processing section. With double-zone vacuum degassing system, volatiles such as moisture and low-moleculars will be removed efficiency,especially suitable to heavy printed and moisture-sensitive plastics scraps re-pelletizing.
 
 

 
Pelletizing
Die-face water ring pelletizing system set as the standard granulating method in ASPTM  system. Self-adjusting pelletizing head for the best granulate quality and long using-life thanks to consistently correct blades pressure. RPM of rotatory blades is automatic based on melt extruding pressure.
 
 

Flowchart:

1. Belt conveyor
2. Hauling roller
3. Shredder
4. Extruder
5. Vacuum volatilization
6. Filtration unit
7. Water-ring pelletizing unit
8. Under water pelletizing unit
9. Strand pelletizing unit
10. Storage silo 

Specification: 
Advantage of Shredding and pelletizing system
Suitable to both light/heavy recycles;
Easier operation;
Intelligence: One-button start/stop;
Smaller space occupation;
Lower energy comsuption, 25% down;
 
 

Computerized horizontal cutting machine is mostly used for shearing sponge block. Electronic control cutter can
hold up and down, sending cutter and platform back and forth. Pressure shaft device
ensures the stability of cutting. Auto shearing and picking up make the operation simple. It
is the best equipment of high quality and efficiency. (Suction is optional)

Manual vertical foam cutting blade is mainly used to cut the large foam into the same length, pieces and slices.
As well as for further process of different specifications of small foam, bidirection cutting can
be choose

Foam Cutting Machine

Sponge Cutter,Electric Foam Cutter,Pu Foam Cutting Machine,Foam Board Cutting Machine

SOFTLIFE MATTRESS MACHINERY CO.,LTD , https://www.softlifefoammachine.com