Stainless Steel 410 Flat Square Drive Self Drilling Metal Screws

Ruspert Plated  Stainless Steel 410 Flat Head Square Drive Self Drilling Screw

Self drilling screws have a drilling tek point, which elimates pre-drilling hole and  saves you time and effort by drilling their own holes and fastening in a single operation.

Stainless Steel 410 is harder than stainless 18-8/304 or 316 after heat-treated, very ideal choice for metal sheet, structure steel etc. 
 
Flat heads are countersunk with a flat top. Square drive, also called Robertson drive, is designed to reduce the risk of cam-out. 

Ruspert plated(from Japan) can reach salt test 1000 hours, greatly improved the anti-rust and corrosion performance,  which enables it very ideal for steel structure close to sea or ocean.

Specification
 
Contact

If you're insterested in our stainless steel 410 square drive self drilling screw, please do not hesitate to send us an email or call us at +8615867456779(Mobile)directly.

For stock, we suggest you double check from us before placing order, thank you!


  Ruspert Plated  Stainless Steel 410 Flat Head Square Drive Self Drilling Screw

Self drilling screws have a drilling tek point, which elimates pre-drilling hole and  saves you time and effort by drilling their own holes and fastening in a single operation.

Stainless Steel 410 is harder than stainless 18-8/304 or 316 after heat-treated, very ideal choice for metal sheet, structure steel etc. 
 
Flat heads are countersunk with a flat top. Square drive, also called Robertson drive, is designed to reduce the risk of cam-out. 

Ruspert plated(from Japan) can reach salt test 1000 hours, greatly improved the anti-rust and corrosion performance,  which enables it very ideal for steel structure close to sea or ocean.

Specification
 
Contact

If you're insterested in our stainless steel 410 square drive self drilling screw, please do not hesitate to send us an email or call us at +8615867456779(Mobile)directly.

For stock, we suggest you double check from us before placing order, thank you!


 

1.introduction; Chuck is used for clamping workpieces on machine tool mechanical device.Using uniform in jaw chuck body on the activity of radial movement, the workpiece clamping and positioning of the machine tool accessories.Chuck is usually mounted on a lathe, cylindrical grinder and internal grinder, can also be used with different dividing device, used for milling and drilling.

2.classification: count from chuck claw can be divided into: two jaw chuck, three jaw chuck, four jaw chuck, six jaw chuck and special chuck.From the use of power can be divided into: Manual Chuck, pneumatic chuck, hydraulic chuck, electric and mechanical chuck chuck.From the structure can be divided into: hollow chuck and implementing chuck

Our company main produce K11series 3 jaw self-centring chucks and K72series 4 jawindependent chucks

1) Three Jaw Chucks : using uniform on the chuck body three jaw radial movement, the workpiece clamping and positioning of the machine tool accessoriesUse voltaic spanner rotating bevel gear, bevel gear drive plane rectangular thread, and then the three claw centripetal movement, because the plane rectangular thread pitch is equal, so three jaw movement distance is equal, have the effect of the automatic centering.

2) four jaw chucks :With four screw drive respectively four claws, so common four jaw chuck no self-centering effect.The commonly used four jaw chuck, is composed of a plate body, four screw, consisting of a pair of jaw.Work is respectively with four screw drive four claws, four claw is only one single jaw chuck card whole claw.

 

Lathe Chuck

Manual Chuck,Lathe Chuck,Lathe Chuck Jaws,Mini Lathe Chuck

NingXia DaHe Machine Tool (Group) Imp And Exp Co.,Ltd , http://www.nxdhjcmachine.com