1.Characteristics of graphics and file management â–¼Graphic library is rich, user can call the graphics in the graphics library to cut, or use G code or ESSI code to generate graphics for cutting. After entering the graphics library, you can set the scale factor, rotation angle, and vertical and horizontal mirror according to your needs. Then the user's required graphics will be displayed.
â–¼ Program uploading and downloading is convenient. You can download the U disk, floppy disk, hard disk code file to the computer for cutting, or you can save the processed parts to hard disk, floppy disk, and U disk. The file extension and the path saved on the hard disk can be selected.
â–¼ Provide a variety of methods to improve the operating efficiency: Cutting flexibility is a very important point, the cutting operation function in the control system allows the user to cut materials and metal steel plates in a very convenient way, select one of these functions, The corresponding interface will be displayed:
é•œåƒ Mirroring function: The mirroring function can be used to create a mirror image of a graph along the X or Y axis. It can mirror the X and Y axes at the same time.
旋转 Rotation function: The rotation function is used to rotate the current graph. Enter any angle to rotate the graph at the appropriate angle.
比例 Proportional function: Proportional function is to enlarge or reduce the existing graphics according to a certain proportion, and input arbitrary scale factors (such as: 0.5, 2) to reduce and enlarge the corresponding multiples of the graphics. You can also restore enlarged or reduced graphics.
é‡å¤ Repeat function: The repeat function is a rectangular, staggered, and overlapping arrangement of graphics. The same part can be quickly completed by repeating the arrangement, and a relatively large figure can be cut.
é’¢æ¿ Steel plate correction: When the user places the steel plate, it will inevitably be skewed. Through the steel plate correction function, the edge (horizontal or vertical) of the cut workpiece can be kept parallel to the steel plate edge.
â–¼ Manually set the cutting compensation value. The user sets the cutting compensation value according to the cutting width (the cutting compensation value should be half of the actual cutting width, which is set in “common parametersâ€), and the system will automatically generate a new cutting. The path compensates the kerf to ensure the dimensional accuracy of the cut part.
▼ Manually modify the machining part code This CNC system can recognize the machining part code in G code (EIA code) and ESSI code format. When the user needs to modify the part code, it can be converted to G code in the “file code†menu. The format file is modified, inserted, deleted, intercepted, etc., which is convenient and practical.
â–¼ Provide fixed-point movement of the fixed-point movement system so that the user can precisely position by entering the direction and distance the nozzle moves.
Chinese cutting machine trading network, allowing you to buy the rest assured! A variety of CNC cutting machine and CNC cutting equipment, a variety of cutting machine models, let the optional! Official website: /
Material Hoist is a kind of mechanical conveying equipment with fixed device.Safety device for rope breaking, safety device for stopping, buffer device, height and limit device, rope preventing device and other safety devices are set up.
Materials Elevator is reliable and easy to operate and maintenance. The highest working lifting height can up to 80m.
SS Series Building Hoist is driven by steel rope. It's a vertical conveyance which is used to carry material.
SS Simple Materials Lift is novel structure, high performance&lower cost, easy install and dismantle.
Materials Hoist Specification Table:
ITEM
UNIT
SS100/100
SS100
Rated Load
kg
1000/1000
1000
Lifting speed
m/min
23.5
23.5
Standard height
m
24
24
Max lifting height
m
80-130
80-130
Cage size
m
2.8*1.5*1.9
2.8*1.5*1.9
Mast section size
m
0.65*0.65*1.5 or 0.8*0.8*1.5
0.65*0.65*1.5 or 0.8*0.8*1.5
Motors power
kw
7.5*2
7.5
Wirerope
/
6*37+1-12-1670-R
6*37+1-12-1670-R
Weight for 24m height
kg
4350
3340
Mast section main limb
mm
Φ76*4
Φ76*4
Application Area:
Materials Hoist is mainly used for continuous vertical lifting of powder, granule and small pieces of material on site. It is usually used in conjunction with Tower Crane on site. It is widely used in the lifting of bulk materials in feed mills, flour mills, rice mills, oil plants, amylum plants, grain depots, port terminals and so on.
If you have any questions, please contact with us directly. Materials Hoist are produced with High Quality and Good Appearance. Welcome you can visit our Factory. For inqury, Please send mail directly to us.
Materials Hoist
Materials Hoist,Twin Cabinets Materials Hoist,Single Cabinets Materials Hoist,Hoist Material Elevator
Jinan East Machinery Co.,Ltd. , http://www.jneastmach.com