The Top Sales Production Easy Catch Magnetic Float Level Switch

The Top sales Production Easy Catch Magnetic float level switch

A.[Feature of Magnetic float level switch]

• Good design and strict production technics;
• Adopt stainless steel material,high mechanical strength and good sealing;
• Cable adopt special material, it have high oil,acid,alkali,corrosive resistance.
• The ON or OFF switch control signal is very reliable and stable,without any error;
• Easy to installation,convenient to debug,fast fluctuation shift random to select the control range.

B.[Parameters]

 

 

C.[Installation]

• Use the black and blue wire.

        when the float is on the level surface,the contact is under the obstructed status,when the float is under the water,the contact is turn-on status;

• Use the black and yellow wire

         When the float is on the level surface,the contact si turn-on status,when is under the water,the contact is the obstructure status;

• Installation of fixed hammer

         The level control height is decided by the cable length of magnetic float type level switch and the position of the hammer;

• The ways of install the hammer
• Displace snap ring of the plastic non-cone terminal,and to the appropriate place on the cable.
• Then let the cable penetrate the terminal of the plastic cone,the snap ring of set on the cable limit the position of the hammer;
• Finally,fixed the cable outside of the container,let the cable connect to control box and avoid using middle joint.if it need joint forbid to put the joint in he water.

 

 

 

The Top sales Production Easy Catch Magnetic float level switch

A.[Feature of Magnetic float level switch]

• Good design and strict production technics;
• Adopt stainless steel material,high mechanical strength and good sealing;
• Cable adopt special material, it have high oil,acid,alkali,corrosive resistance.
• The ON or OFF switch control signal is very reliable and stable,without any error;
• Easy to installation,convenient to debug,fast fluctuation shift random to select the control range.

B.[Parameters]

 

 

C.[Installation]

• Use the black and blue wire.

        when the float is on the level surface,the contact is under the obstructed status,when the float is under the water,the contact is turn-on status;

• Use the black and yellow wire

         When the float is on the level surface,the contact si turn-on status,when is under the water,the contact is the obstructure status;

• Installation of fixed hammer

         The level control height is decided by the cable length of magnetic float type level switch and the position of the hammer;

• The ways of install the hammer
• Displace snap ring of the plastic non-cone terminal,and to the appropriate place on the cable.
• Then let the cable penetrate the terminal of the plastic cone,the snap ring of set on the cable limit the position of the hammer;
• Finally,fixed the cable outside of the container,let the cable connect to control box and avoid using middle joint.if it need joint forbid to put the joint in he water.

 

 

 

PVA 088-35

Sinopec Sundy Pva 088-35,Wanwei Pva 2088,Changchun Pva Bp-20,Shuangxin Pva 088-35

Saint Petrochemicals Limited , https://www.saintpec.com