Wheel Cleaner, Wheel Cleaner Spray, Chrome Wheel Cleaner Aerosol

Posted on

Model NO.: AK-CC5004
HS Code: 3402
Model NO.: AK-CC5004
HS Code: 3402

Wheel Cleaner, Wheel Cleaner Spray, Chrome Wheel Cleaner Aerosol
Wheel Cleaner, Wheel Cleaner Spray, Chrome Wheel Cleaner Aerosol
AUTOKEM Wheel Cleaner's unique foam formula breaks down tough road grime and brake dust without hard scrubbing, to leave your wheels with a clean, reflective mirror like finish.
 
Easily applied in foam form/ Breaks down dirt effectively
Does not attack wheel finish / Washes off without leaving a residue
    
Features & Benefits:
- Powerful foaming action
- Cleans dirt and road grime
- Spray on, wipe / hose off
- Removes break dust and road grime
- Removes stubborn stains
 
Description:
AK-CC5004 Wheel Cleaner has a powerful foaming action, it penetrates brake dust and road film contamination and facilitates the easy removal of unsightly soiling, leaving wheels bright and clean without damaging metal surfaces or attacking lacquer coatings tyres or paintwork.

Directions:
1. Spray the cleaner to the wheel rim when it cools off.
2. Soak the deposit and dirt for about 30 minutes.
3. Rinse off with water.
4. Wipe the wheel rim with a clean and soft cloth
5. For heavy deposit or stain, assist clean with dry towel or soft brush
 
Caution:
1. When treat the residue liquid in the can, should prevent infiltrating into river, stream, lake.
2. Avoid contacting eyes or skin for long time. if contacted, wash with plenty of water and see doctor.
3. Do not puncture or burn can.
4. Store away from heat source, or hot place over 50 degree centigrade.
5. Keep out the reach of Children


Wheel Cleaner, Wheel Cleaner Spray, Chrome Wheel Cleaner Aerosol
Contact information:
Telephone 24hr: +86-(0)755-83465042
Customer Service: +86-(0)755-83465042
Website: www.autokem.com


Wheel Cleaner, Wheel Cleaner Spray, Chrome Wheel Cleaner Aerosol
Wheel Cleaner, Wheel Cleaner Spray, Chrome Wheel Cleaner Aerosol
AUTOKEM Wheel Cleaner's unique foam formula breaks down tough road grime and brake dust without hard scrubbing, to leave your wheels with a clean, reflective mirror like finish.
 
Easily applied in foam form/ Breaks down dirt effectively
Does not attack wheel finish / Washes off without leaving a residue
    
Features & Benefits:
- Powerful foaming action
- Cleans dirt and road grime
- Spray on, wipe / hose off
- Removes break dust and road grime
- Removes stubborn stains
 
Description:
AK-CC5004 Wheel Cleaner has a powerful foaming action, it penetrates brake dust and road film contamination and facilitates the easy removal of unsightly soiling, leaving wheels bright and clean without damaging metal surfaces or attacking lacquer coatings tyres or paintwork.

Directions:
1. Spray the cleaner to the wheel rim when it cools off.
2. Soak the deposit and dirt for about 30 minutes.
3. Rinse off with water.
4. Wipe the wheel rim with a clean and soft cloth
5. For heavy deposit or stain, assist clean with dry towel or soft brush
 
Caution:
1. When treat the residue liquid in the can, should prevent infiltrating into river, stream, lake.
2. Avoid contacting eyes or skin for long time. if contacted, wash with plenty of water and see doctor.
3. Do not puncture or burn can.
4. Store away from heat source, or hot place over 50 degree centigrade.
5. Keep out the reach of Children


Wheel Cleaner, Wheel Cleaner Spray, Chrome Wheel Cleaner Aerosol
Contact information:
Telephone 24hr: +86-(0)755-83465042
Customer Service: +86-(0)755-83465042
Website: www.autokem.com

The Crankshaft Position Sensor is usually installed inside distributor, is one of the most important Sensor in the ignition system. Normally crankshaft position sensors have Hall- type, Magnetic-electric type and Photoelectric type. Its functions are as following: first, it can detect engine speed, therefore, it also known as the rotational Speed Sensor. Second, it can detect the position of top dead center of piston, so also know as TDC sensor.

Sometimes, the sensor may become burnt or worn out. The most likely causes of crankshaft Position Sensor failure are exposure to extreme heat. Many modern crankshaft sensors are closed units and therefore will not be damaged by water or other fluids. When it goes bad, it stops transmitting the signal which contains the vital data for the ignition and other parts in the system.


Crankshaft Position Sensor

Crankshaft Position Sensor,Engine Crankshaft Position Sensor,Electrical Crankshaft Position Sensor,Hyundai Crankshaft Position Sensor

NINGBO DGOFEN AUTO TRADE CO., LTD , http://www.dgofen.com