Gas column configuration experience sharing

The experience of GC column configuration is very common. The friend who uses the gas chromatograph for the first time does not know how to configure the column properly. He always hopes that the more columns, the better. He blindly purchases many columns or fixatives, supports, etc., resulting

Cummins QSB and QSX series engines will shine in Paris

Cummins will demonstrate in Paris on construction machinery exhibition meet the United States and Africa highway Phase IV Final emission standards (EPA Tier 4 Final / EU Stage IV) QSB series of 6.7 lite

Hot spare parts in aftermarket

After years of rapid growth, China's auto sales market is returning steadily. With the continued increase in the number of car ownership, the after-sales service market has become even more eye-catching. In particular, as a continuation of the vehicle sale

Experimental Analysis of Multi-stage Secondary Gear Welding Technology


Class C steel gears are mainly subjected to dynamic loads or impact loads during operation, so welds are required to have better overall performance. Due to the poor weldability of C-grade steel gears, cold/hot cracks are easily generated during welding. Therefore, several problems must be

The difference between valve and gate valve and selection

Gate valve opening and closing pieces is the gate, the direction of movement of the gate and fluid perpendicular to the gate valve can only be fully open and closed, unsuitable for regulation and throttling. The gate has two sealing surfaces. The two most commonly used wedge gate valves form

Cooling temperature sensor characteristics change fault analysis

The coolant temperature sensor consists of a negative temperature coefficient thermistor that is very sensitive to temperature changes. This resistance has the property that the higher the outside temperature is, the lower its resistance value is. According to this characteristic, the temperatu

Judgment wheel dumping screaming Chinese parts ** theory

On March 19, the U.S. Department of Commerce issued a final ruling in which Chinese steel wheel manufacturers or exporters dumped steel wheels in the United States, with dumping rates ranging from 44.96% to 193.54%. At the same time, such products also receive