For minor flaws and scratches on the machine guide rails, as long as they are repaired with a scraper or grindstone, they can continue to operate. For gluing flaws, they need to be repaired by welding repair or filling and filling, and the welding of the machine guide rails. Repairing and s…
University of Natural Sciences, according to the power flow design closed 2K-H gear mechanism Wang Qiongying (School of Mechanical Engineering, Xiangtan University, Xiangtan, 411105) gear combination mechanism.
Key words: differential ratio; closed chain; power flow parallel single-fr…
On the morning of July 15, the inaugural meeting of the “National Auto Parts Anti-Counterfeiting and Better Cooperation Network†(hereinafter referred to as “Collaboration Networkâ€) was held in Beijing Friendship Hotel.
Deputy Directo…
The design speed is 100 km / h, and the Renhuai to Zunyi Expressway has to be built! On September 28th, it was learned from the Guizhou Provincial Department of Transportation that the construction drawing design of the Renhuai-Zuny…
The Un…
- Model NO.: TYE-05 …
- Model NO.: BW-R14 …
From the perspective of the wear of the imported gears, the failure may be caused by the failure of the original machine when the disassembly and assembly process is performed. The seal is not good, and some hard particles (metal scraps, particles, etc.) are mixed or suspended. In the lubr…
Official vehicles are changing from "government officials" to "civilians," and demand for high-quality commercial vehicles is also increasing. However, the current emission standards for commercial vehicles are worrying. The national standard for light-duty diesel vehi…