A small way to identify an accident car

At present, the domestic used car market is quite confusing, and many consumers are afraid to buy an accident car. In the end, how do you identify whether the car is an accident car ? In fact, there are many ways. The following are some of the experiences that Xiaobian has shared with you.

First look at the front face, observe the details, and whether the two sides are symmetrical; whether the headlights and the fog lights on both sides are the same or not; whether the gaps on both sides of the hood are the same.

Then take a look around the vehicle and look at the side, look at the waistline, and then look at the color difference between the various plates, look at the gap, see the sheet metal repair, sheet metal repair will have some uneven place, made the paint , The paint is irregular underneath. Note that it is irregular. Looking at the edge of the lamp, there is a dusty thing that shows the paint.

小车,鉴定

See look behind the vehicle with the vehicle in front, as if left and right symmetry; whether the old and new level of consistency on both sides of the tail lamp and the like.

Look at the glass factory date. At the bottom of the glass, there is a “1....” that is the date of manufacture. This number “1” indicates the year, ie, 2001 or 2011, and if it is 2, it is 2002 or 2012.

The black dot indicates the month, the black dot indicates the factory in the first half of the year, and the number of 7- black dots = the month (for example, " ...1 ", there are 4 black dots, and 7-4=3 , that is , the factory in March . ) Black spots are indicated after the figures in the second half of the year, with 13- black spots = month (for example " 1.... ", there are 4 black spots, 13-4 = 9 , that is September factory).


Look at the screws on the door to see if there are any passive marks. Then look at the shape of the door frame, remove the rubber strip of the door frame, hold it at the top of the strip when it is removed, pull it down, and don't tear the strip. As shown in the above picture, when you open the tape, you will find a small dot. The dot is the reference material. It is smooth, orderly, and evenly spaced. The edge of the door frame is a few layers together.

Often, the opposite occurs.

Let's talk about the engine compartment. Look at the position of the front hood lock. Looking down from this lock position, you see the white crash beam (an example of a white car). It is white, and it is also white. of. In most cases, the color of the collision beam of the vehicle is the same as the color of the vehicle body. In a few cases, the aluminum alloy is not painted.

If the colors are different, see if the screws in the tank frame have been screwed. Here again, the paint is painted on the screw. Usually the paint on the screws of the whole vehicle is the color, including the screws on the engine , including all the screws under the chassis .


Inside the vehicle's fender, you can see there is no gilding repair inside. In fact, these conditions are still good, the arrow points to the lining of the leaves, this time the most important thing is to see whether the lining has folds, whether it has re-sprayed paint. Spray paint on the stringers only once or twice.

Looking at the engine 's feet again, the age is too old, and it's normal for a family car to change his feet a few years. But if you are buying a new quasi- car , there are obvious signs of changing the machine. Even if there is no accident , the condition may not be very good.

Sealant. The original sealant is soft in most cases and can be snagged in with a fingernail.

Xiao Bian wants customers to polish your eyes when they buy a car.




Static Mixer

Static Mixer,Stainless Steel Mixing Element,Duplex Mixing Element,Duplex Low Pressure Drop Mixe

Wuxi Zerru Technology Co., Ltd , https://www.zerruflow.com