The Professional magnetic induction metal detector designed for the Aluminum packaging products which the traditional metal detector difficult to detect
Automatic conveyor type
FEATURES
New circuite design, high sensitivity.
Excellent reliability
Excellent anti-disturbance performance
Balance of product essential revise technology
Stainless steel frame(Optional)
Designed for universal AC power supply, switch power supply
PURPOSE
Designed for food industry. Garment industry and pharmaceutical industrial use
Also can fit for detecting the chemical products, rubber products
SPECIFICATION
Model NDC-400(100mm)
Detection method Magnetic induction
Detection ability Fe: 1.0mm
Detection adjustment 10steps
Detection Width 400mm
Alarm method Buzzer, Lamp
Belt speed 32m/min(50Hz), 40m/min(60Hz)
Power source AC220V/380V 50-60Hz
Rated Output Appr 140W
Dimension 1300mm(L)*850mm(W)*1100mm(H)
Weight Appr 180kg
Detection height Detection Sensibility(Center of probe) Remark
80mm Fe: 0.8mm Option at Factory
100mm Fe: 1.0mm standard type
120mm Fe: 1.0mm Option at Factory
150mm Fe: 1.2mm Option at Factory
200mm Fe: 1.5mm Option at Factory Aluminum Packaging Metal Detector (NDC-400/100mm)
The Professional magnetic induction metal detector designed for the Aluminum packaging products which the traditional metal detector difficult to detect
Automatic conveyor type
FEATURES
New circuite design, high sensitivity.
Excellent reliability
Excellent anti-disturbance performance
Balance of product essential revise technology
Stainless steel frame(Optional)
Designed for universal AC power supply, switch power supply
PURPOSE
Designed for food industry. Garment industry and pharmaceutical industrial use
Also can fit for detecting the chemical products, rubber products
SPECIFICATION
Model NDC-400(100mm)
Detection method Magnetic induction
Detection ability Fe: 1.0mm
Detection adjustment 10steps
Detection Width 400mm
Alarm method Buzzer, Lamp
Belt speed 32m/min(50Hz), 40m/min(60Hz)
Power source AC220V/380V 50-60Hz
Rated Output Appr 140W
Dimension 1300mm(L)*850mm(W)*1100mm(H)
Weight Appr 180kg
Detection height Detection Sensibility(Center of probe) Remark
80mm Fe: 0.8mm Option at Factory
100mm Fe: 1.0mm standard type
120mm Fe: 1.0mm Option at Factory
150mm Fe: 1.2mm Option at Factory
200mm Fe: 1.5mm Option at Factory
A recovery strap is designed to "recover" a vehicle from the ditch, mud, etc. Nylon recovery straps have loops on each end for ease of use. A Tow Strap should not be used to recover or "snatch" a vehicle that's stuck. Traditional vehicle tow straps are much less flexible and designed only to pull a load that freely moves. The strap's inability to stretch can't absorb energy, which increases the likelihood that it will break. The metal hooks on the ends can then come unhooked and launch through the air at high speeds, injuring bystanders or the vehicles. Using a tow strap with very little stretch is extremely unsafe.
Rear Tow Strap,Heavy Duty Tow Straps,Rescue Tow Straps 30Ft,Car Tow Rope,Recovery Tow Straps
WINNERLIFTING SAFETY EQUIPMENT CO., LTD. , https://www.webesteu.com