Daily cleaning and maintenance of automatic sealing machine

Lead: Learning to regularly maintain the automatic sealing machine is the most common method to maintain the mechanical life, which indirectly saves the cost for the enterprise, but also avoid unnecessary mechanical failure, improve the sealing machine work efficiency, so it is very necessary to maintain of.

The first thing to understand is that the maintenance of the automatic sealing machine is mainly based on the operation and maintenance work. The maintenance cycle can be based on the working environment and working conditions of the equipment.

(1) The automatic sealing machine should be placed in a ventilated, dry place. The room temperature can be maintained at about 25°C.

(2) When the shrink film residue is found at the edge of the sealing knife, gently remove the surface residue with a cotton towel (when the knife has temperature). It is forbidden to use a metal wipe because metal friction will break the protective film on the knife and reduce the function of the seal knife.

(3) If the automatic sealing machine is used for a long time, it should be noted that the cooling switch should be turned on before shutting down.

(4) Regular inspection of severely worn parts should be promptly replaced, such as cutting Teflon tape on the silicone strip to extend the life of the whole machine.

(5) Dirt should be regularly removed at high temperature and replaced in an emergency. To ensure the quality of sealing.