High speed metal stud roll forming machine
Profile Shape: C shape, U shape, or as per your request.
Components of Metal Stud Production Line
1. Decoiler
2. Leveling device
3. Main Forming System
4. Hydraulic Cutting Device (Punching device is available if you need)
5. Run-out Table
6. Electrical and Controlling system
Technical Parameters of metal stud roll forming machine:
1. Feeding Machine
1). Inner Diameter: 400mm-600mm
2). The largest width: 600mm
3). Capacity: 2500kg
4). Manual with brake
2. Leveling device
1)Ensure the material level and straight
2)The width can be adjusted.
3. Main Forming System
1) width: As per drawing
2)Height: As per drawing
3)Thickness of sheet: 0.2-1.2mm
4)Material: GI sheet coil or cold rolled coil or Aluminium
5)Roller stations: 10 rows
6)Material of Roller: GCr12mov
7)Surface of Roller: Heat treatment HRC58-60
8)Diameter of main shaft: 60mm #45 steel, heat treat modulation
9)Power of main motor: 5.5kw
10)Forming Speed: 0-50m/minute
11)Transmission: By gear
12)Bearing: Spherical
13)Safety Hood: Cage
14)Arch middle plate: 30mm thickness
4. Cutting device
1)Oil pump station 1set
2)Motor power of Oil pump station: 4kw with cooling system
3)Forced air cooling device available
4)Cutting mould: 1set
5)Material of blade: CR12 with heat treatment HRC60-62
6)Cutting way: Tracking (flying)
5. Run-out Table
1)Frame: 8# steel groove welded
2)Length: 4mx1m
3)Quantity: 1 pc
6. Electrical System
1)PLC and HMI touch Screen (Taiwan Delta or Siemens)
2)Automatic length measurement
3)Automatic quantity measurement
4)Length measurement: Rotary Encoder
5)Over current protection for control system, aviation plugs
6)Power: 380V 50Hz (as per local requirement)
We can also design and manufacture as per your request!
Jacky (sales manager)
Botou Huikeyuan Engineering Control Co., Ltd.
Tel: 86-317-7668238
Fax: 86-317-3087243
Mobile: +86-15503170286
| Advantage of our stud and track forming machines |
| High quality |
| Lower cost |
| Durableness |
| High efficiency |
| Reliable working |
| Low failure rate |
| Low energy consumption |
| Trouble free after sales service |
Precipitated Calcium Carbonate
Uses: Can be used as filler in rubber, plastics, paper, paint and ink industries. Widely used in organic synthesis, metallurgy, glass and asbestos production. It can also be used as a medium seeding agent for industrial waste water, a antacid for stomach and duodenal ulcers, a detoxifying agent for acidosis, a SOâ‚‚ eliminating agent in SOâ‚‚-containing exhaust gas, a dairy cattle feed additive and an anti-sticking agent for oil felt . It can also be used as a raw material for tooth powder, toothpaste and other cosmetics.
Usually used as a filler, widely used in daily chemical industries such as artificial floor tiles, rubber, plastics, papermaking, coatings, paints, inks, cables, construction supplies, food, medicine, textiles, feed, toothpaste, etc., as a filler to increase products The volume is reduced, and the production cost is reduced.
Light Calcium Carbonate is made of limestone, and can be used in daily chemical products such as tooth powder, toothpaste, cosmetics, etc. It can also be used in organic synthesis, metallurgy, glass and asbestos production.
The particle size of light calcium is smaller than that of Heavy Calcium Carbonate, the oil absorption is larger than that of heavy calcium carbonate, and the price is higher than that of heavy calcium carbonate. They are all commonly used fillers in latex paint, and they are best used together. Light calcium is better in terms of sedimentation, but its oil absorption is greater than that of heavy calcium, and the price is generally more expensive than heavy calcium. Although it is not as stable as heavy calcium, it is stable. Even for exterior wall paint, its application amount is also very large. of.
Precipitated Calcium Carbonate,Precipitate Calcium Carbonated Powder,Precipitated Calcium Carbonate Manufacturers,Activated Precipitated Calcium Carbonate
Henan Shunbang Chemical Industry CO.,Ltd , https://www.sbcpe.com