In the first three quarters of 2011, Japan's accumulated machine tool orders amounted to 997.271 billion yen.

According to the latest machine tool order data released by the Japan Machine Tool Industry Association (JMTBA), in September 2011, Japan's machine tool orders amounted to 110.679 billion yen, a year-on-year increase of 11.9% and a year-on-year increase of 20.3%. From January to September, Japan's machine tool orders exceeded 100 billion yen in eight months, and fell to below 100 billion yen in August alone. In the first three quarters of 2011, Japan’s accumulated machine tool orders amounted to 997.271 billion yen, an increase of 41.9% from the same period in 2010, and this figure has exceeded the 2010 annual value of 978.62 billion yen.

According to JMTBA’s president Yokoyama Motohiko, the order for Japanese machine tools in 2011 is expected to reach 1.3 trillion yen, an increase of approximately 30% from 2010. If this goal can be achieved, Japan's machine tool orders will basically return to 2008 levels.

From the perspective of domestic and international demand, in September, Japan's domestic machine tool orders amounted to 35.738 billion yen, a decrease of 4.9% from the previous quarter but an increase of 31.8% year-on-year. In September, Japan's overseas machine tool orders amounted to 74.941 billion yen, an increase of 22.1% from the previous quarter and a year-on-year increase of 15.5%. In the first three quarters of the year, domestic orders for Japanese machine tools accumulated to 317.403 billion yen, an increase of 44.3% year-on-year; cumulative overseas orders were 680.228 billion yen, a year-on-year increase of 40.8%.

VNbAlC

Appearance: black powder
CAS:
Element: V, Nb, Al, C
Purity: by X-ray result
Molecular Weight: 182.84
Apparent Density (g/cm3): ---

Storage: dry seal preservation below 50 ℃.
Do not use if cap seal is broken.
Keep out of reach of children.


Storage conditions and validity:

This product should be stored in room temperature and dry place, avoid contact with acid, alkali and other liquids, long-term storage will happen slow oxidation.

Test method:

This product can be confirmed by X-ray powder diffractometer crystal results; Element composition was confirmed by energy dispersive X-ray detector. The same morphology characterization was used to characterize the particle morphology. The particle size distribution was evaluated by laser particle size analyzer.



Safety protection:

1. Health hazards

Hazardous category: Non-hazardous chemical chemical category: ceramic powder;

Route of invasion: inhalation, ingestion;

Health hazards: dust in the eye has irritation, oral stimulation of gastrointestinal tract;

2. First aid measures

Skin contact: Remove contaminated clothing and rinse skin thoroughly with running water.

Eye contact: lift eyelid and rinse with plenty of running water or normal saline for at least 15 minutes;

Inhalation: Get away from the scene to fresh air quickly;

Ingestion: drink enough warm boiled water, induce vomiting, seek medical advice;

3. Ignition and explosion characteristics and fire protection

Flammability: non-flammable;

Vnbalc Powder,High Density Vnbalc,Vnbalc Black Powder,Mixed Metal Vnbalc

Jilin 11 Technology Co.,Ltd , https://www.11techmxene.com