- Model NO.: M02-609
- Pressure: High Pressure Mechanical Seals
- Temperature: High Temperature Mechanical Seal
- Standard: Standard
- Structure: Single End
- Speed: Ultra-High-Speed Mechanical Seal
- Performance: Temperature
The Type 609 incorporates all of the rugged features of the Type 604, but is intended for those demanding applications where a dependable, high-strength, rotating seal is preferred. A narrow cross-section design enables the Type 609 to fit in most popular pumps without expensive and time-consuming stuffing box modifications. This makes it the ideal seal for heat transfer and other applications that commonly use pumps with limited seal chamber clearances.
Materials of Construction:
Bellows: Heat-treated AM350 or Inconel 718
Adaptive Hardware: 300 Series Stainless Steel
Faces: Carbon, Tungsten Carbide, or Sealide®
Static Seals: Grafoil
Performance Capabilities:
Temperature: -75°C/-100°F to 425°C/800°F with Grafoil static packing
Pressure: vacuum to 20 bar/300 psi
        vacuum to 69 bar/1000 psi
        with DOUBLE-PLY bellows
Speed: to 25 mps/4500 sfpm for Types 606 and 609 to 50 mps/10,000 sfpm for Type 604
Reton Li
Mob: +86-13913296696
Tel: +86-512-58103528
Fax: +86-512-56935782
Website: http://www.akseal.com/en
Â
The New Generation of coolers is suitable for the cooling of all kinds of pellet feed.
The temperature and moisture of pellets after pelletizing is too higher, can not pack the bags directly. so, we need use cooler to down it.
The principle of Counter-flow cooler is used to cool the pellets of high temperature and high humidity, and the materials are gradually cooled down from bottom to top, so as to avoid the phenomenon of quench caused by the direct contact between cold air and hot materials, so that feed can Prevent Surface Cracking.
Pellet Cooler,Counter Flow Cooler,Prevent Surface Cracking,Feed Counter Flow Cooler
XinxiangHexie Feed Machienry Manufacturing Co.Ltd , https://www.feedmill.nl