Maipu brilliance for wall-mounted LED screen installation structure analysis

Posted on

LED screen installation structure analysis, LED screen installation methods are many, the most commonly used is wall-mounted structure, followed by column and mosaic installation, lifting and hanging are often used in the field of road traffic, LED screens are installed in different ways Not the same, there is Maipu brilliance for everyone to explain in detail the difference between outdoor and indoor LED screen wall structure.
Let us first talk about the outdoor LED screen installation structure, the required material is 40×40mm square pass and channel steel. In the welding process, the width of each square pass should be reserved according to the width of the box. The LED screen steel structure is surrounded by slots. Steel to fix the entire frame, the bottom channel must maintain the T shape with the vertical square pass. If the LED screen height is high, the horizontal corridor should be welded in the steel structure maintenance channel for future maintenance and maintenance.

The indoor LED screen structure is much simpler. At present, the Maipu glare indoor LED screen is usually made very thin, which is beautiful and does not take up too much space. Standing on the front of the LED screen can be easily maintained. The required materials are 40×40mm and 40×20mm square pass, 40×40mm square pass is placed on the bottom to play a fixed role, and 40×20mm square pass is placed on top to separate each square according to the width of the LED module. The square wire is locked in a cross shape by a connecting piece, and finally the assembled structure is fixed on the wall.
The difference between outdoor and indoor LED screens is whether or not to reserve maintenance channels.
First, the installation method of the outdoor display. The general installation method is to fix the screw on the wall. In the fixed frame, install the screen in the frame, connect the power cable, cable, and illuminate the debugging.
General installation methods are: 1) column type, 2) mosaic type, 3) roof type,
Second, the installation mode of the indoor display
1) Mounting (wall mounted) is suitable for Maipu brilliance display below 10 square meters. The wall requirements are solid walls or concrete beams at the suspension. Hollow bricks or simple partitions are not suitable for this installation method.
2) The rack mount is suitable for display above 10 square meters and is easy to repair. Other specific requirements are the same as wall stickers.
3) Hoisting: It is suitable for display screens up to 10 square meters. This installation method must have a suitable place for installation, such as beams or lintels above. And the screen generally needs to add a back cover.
4) Seat: Removable seat: It means that the frame is processed separately. Placed on the ground, it can be moved. Fixed seat: The seat is a fixed frame that is connected to the ground or wall.

Buttweld pipe Bend

Bend Type welded/seamless BEND 90° 45° 180° 2.5D 3D 5D 6D 12D

Standard: ASME/ANSI B16.9 ANSI/ASME B16.11 ANSI/ASME B16.28

BSEN10253-2 BS EN10253-4

Size:1/2''~48''(Seamless); 16''~80''(Welded)

Wall thickness: Sch5~Sch160\XXS

Manufacturing process: Hot Extruded , cold extruded ,pressed , etc.

Material:

Carbon steel:

FSGP PG370W PT370
.ASTM / ASME A234: WPB - WPC - WP1WP11 - WP12 - WP5 - WP22 - - WP91
ASTM / ASME A/SA 420: WPL6 - WPL3EN 10216-2: P195GH - P235GH - P265GH-P355Nh
20MnNb6 - 16Mo3 - 8MoB5-4 - 14MoV6310CrMo5-5 - 13CrMo4-5 - 10CrMo9-10-15NiCuMoNb5-6-4 - X11CrMo5X11CrMo9-1 - X10CrMoVNb9-1X10CrWMoVNb9-2 - X20CrMoV11-1former BS-DIN-AFNOR equivalent grades)

HIGH YIELD STEEL FOR PIPELINE AND OFFSHORE FITTINGS
ASTM A860 / MSS-SP75: WPHY 42WPHY 46 - WPHY 52 - WPHY 60-WPHY 65 - WPHY 70 grades
WPHY 80 only as per MSS-SP75 EN 10208-2: L245NB - L290NBL360NB - L415NB - L360QBL415QB - L450QB - L485QB - L555Q

Stainless steel:

304/SUS304/UNS S30400/1.4301

304L/UNS S30403/1.4306;

304H/UNS S30409/1.4948;

309S/UNS S30908/1.4833

309H/UNS S30909;

310S/UNS S31008/1.4845;

310H/UNS S31009;

316/UNS S31600/1.4401;

316Ti/UNS S31635/1.4571;

316H/UNS S31609/1.4436;

316L/UNS S31603/1.4404;

316LN/UNS S31653;

317/UNS S31700;

317L/UNS S31703/1.4438;

321/UNS S32100/1.4541;

321H/UNS S32109;

347/UNS S34700/1.4550;

347H/UNS S34709/1.4912;

348/UNS S34800;

Alloy steel:

ASTM A234 WP5/WP9/WP11/WP12/WP22/WP91;

ASTM A860 WPHY42/WPHY52/WPHY60/WPHY65;

ASTM A420 WPL3/WPL6/WPL9;

Duplex steel

ASTM A182 F51/S31803/1.4462;

ASTM A182 F53/S2507/S32750/1.4401;

ASTM A182 F55/S32760/1.4501/Zeron 100;

2205/F60/S32205;

ASTM A182 F44/S31254/254SMO/1.4547;

17-4PH/S17400/1.4542/SUS630/AISI630;

F904L/NO8904/1.4539;

725LN/310MoLN/S31050/1.4466

253MA/S30815/1.4835;

Nickel alloy steel:

Alloy 200/Nickel 200/NO2200/2.4066/ASTM B366 WPN;

Alloy 201/Nickel 201/NO2201/2.4068/ASTM B366 WPNL;

Alloy 400/Monel 400/NO4400/NS111/2.4360/ASTM B366 WPNC;

Alloy K-500/Monel K-500/NO5500/2.475;

Alloy 600/Inconel 600/NO6600/NS333/2.4816;

Alloy 601/Inconel 601/NO6001/2.4851;

Alloy 625/Inconel 625/NO6625/NS336/2.4856;

Alloy 718/Inconel 718/NO7718/GH169/GH4169/2.4668;

Alloy 800/Incoloy 800/NO8800/1.4876;

Alloy 800H/Incoloy 800H/NO8810/1.4958;

Alloy 800HT/Incoloy 800HT/NO8811/1.4959;

Alloy 825/Incoloy 825/NO8825/2.4858/NS142;

Alloy 925/Incoloy 925/NO9925;

Hastelloy C/Alloy C/NO6003/2.4869/NS333;

Alloy C-276/Hastelloy C-276/N10276/2.4819;

Alloy C-4/Hastelloy C-4/NO6455/NS335/2.4610;

Alloy C-22/Hastelloy C-22/NO6022/2.4602;

Alloy C-2000/Hastelloy C-2000/NO6200/2.4675;

Alloy B/Hastelloy B/NS321/N10001;

Alloy B-2/Hastelloy B-2/N10665/NS322/2.4617;

Alloy B-3/Hastelloy B-3/N10675/2.4600;

Alloy X/Hastelloy X/NO6002/2.4665;

Alloy G-30/Hastelloy G-30/NO6030/2.4603;

Alloy X-750/Inconel X-750/NO7750/GH145/2.4669;

Alloy 20/Carpenter 20Cb3/NO8020/NS312/2.4660;

Alloy 31/NO8031/1.4562;

Alloy 901/NO9901/1.4898;

Incoloy 25-6Mo/NO8926/1.4529/Incoloy 926/Alloy 926;

Inconel 783/UNS R30783;

NAS 254NM/NO8367;

Monel 30C

Nimonic 80A/Nickel Alloy 80a/UNS N07080/NA20/2.4631/2.4952

Nimonic 263/NO7263

Nimonic 90/UNS NO7090;

Incoloy 907/GH907;

Nitronic 60/Alloy 218/UNS S21800


Bend is bent by a set of bending equipment, divided into cold simmer and hot push two processes. No matter what kind of machinery and piping, most of them use elbow pipes, mainly for oil transportation, gas transportation, transfusion, engineering and bridge construction, etc.

The material of the elbow is cast iron, stainless steel, alloy steel, malleable iron, carbon steel, non-ferrous metal and plastic. It can be divided into pushing, pressing, forging, casting and so on.


Manufacturing standards can be divided into national standard, electric standard, shipping mark, chemical standard, water mark, American Standard, German standard, Japanese standard and Russian standard.



Buttweld Pipe Bend,Stainless Seamless 5D Bend,Seamless 5D Bend,Hot Induction Bend

HeBei GuangHao Pipe Fittings Co .,LTD (Cangzhou Sailing Steel Pipe Co., Ltd) , https://www.guanghaofitting.com