Petroleum and petrochemical industry demand for instrumentation

With the increasingly tense oil resources, coal chemical industry, as the key to China's medium and long-term energy development strategy, will occupy an important position in the long-term development in the future. China plans to invest more than 1 trillion yuan to vigorously develop the coal chemical industry? It plans to build seven coal chemical industry zones across the country: the Yellow River Middle and Lower East, Mengdong, Heidong, Sulu, Henan, Central Plains, Yungui and Xinjiang. At the same time, the transformation of chemical companies into coal chemical industry has become a trend. Successively, Shuanghuan Technology, Lutianhua, Yuntianhua, Liuhua, and Hubei Yihua have all set foot in the coal industry to prepare for the transition to coal chemical industry.

In the industrial route, both the coking industry, coal gasification-synthetic ammonia, coal-based methanol, coal-synthetic oil, and coal-to-chemical cogeneration all have a wide range of demand for gaseous products, especially sulfur dioxide, hydrogen sulfide, carbon monoxide, chlorine, and ammonia. Gas and other gas sensors demand is very large? Preliminary calculations? Average per 10,000 tons of coke production requires about 22 gas sensors (sets)? Among them, 10 combustible gases (sets), 12 toxic gas (sets); with the current coke 2.6 Billion tons of annual production calculation? Need to use combustible gas detection equipment 260,000 sets (sets)? Toxic gas detection equipment more than 312,000 sets (sets)? Total annual demand is about 572 thousand units (sets) around? According to each set of gas Detection Instruments 2000 yuan calculation? Currently in the entire coal chemical industry gas detection instrumentation market capacity will reach 1.144 billion yuan.

Large-scale chemical manufacturing industrial parks such as fine chemicals, bio-chemicals, specialty chemicals, and agrochemicals also have a wide range of demand for gas detectors. The newly promulgated “Safety Facilities Directory for Hazardous Chemical Construction Projects” clearly stipulates the installation of “pressure, degree, level, flow, composition and other reporting facilities, and detection and reporting facilities for combustible gases, toxic and hazardous gases, and oxygen.” There are more than 60 chemical parks under construction in China. Relying on the Yangtse River Economic Zone and the Yangtze River Delta region of the Yangtze River, chemical parks such as Sichuan Western Chemical City, Suzhou Industrial Park, and Shanghai Chemical Industry Park have formed; relying on the Pearl River Economic Belt and the Pan-Pearl River Delta, Maoming and Huizhou have formed. Zhuhai and other chemical industrial parks. Only the above-mentioned chemical industrial parks have entered a total of more than 7,300 chemical companies, covering production of basic chemical raw materials and synthetic materials, chemical raw materials and chemical products, pesticides, specialty chemicals, and rubber products. The demand is all-round, covering almost all types of gases, among which organic vapors, flammable other, sulfur-containing and nitrogen-containing gas detection products are the most. With the continuous tightening of the safety requirements for chemical and hazardous chemicals processing by the State General Administration of Seismology, the amount of gas detection instruments used in the chemical and hazardous chemicals processing industries has been increasing year by year. The current market capacity is about 300,000 units (sets), of which combustible gases About 227,000 units (sets)? About 73,000 organic vapors and toxic gases (sets). According to 2,000 yuan for each product, it will have a market size of over 600 million yuan.

From the perspective of China's industrial development? During the “11th Five-Year Plan” period, China’s petroleum and chemical industries will follow the direction of basement, large-scale, and integrated development. Optimize the development of basic chemical raw materials, actively develop fine chemicals, and eliminate high-polluting chemical companies. It is understood that the state will build several 10 million-ton oil refinery enterprises and million-ton ethylene refining and chemical integration bases in areas with abundant resources and strong market demand, forming international competitions in the Bohai Bay, Hangzhou Bay, and the Pearl River Delta. Power of refinery companies. The first batch of four national oil reserve bases will be built: the total capacity of the four oil reserve bases in Ningbo Zhenhai, Zhoushan, Zhejiang, Qingdao in Shandong, and Dalian, Liaoning, will reach 16 million cubic meters. In 3 years, 20 or so tons of crude oil processing bases will be gradually formed.

In 2008, China will start construction of three major oil refining projects in advance: namely, China National Petroleum Corporation and Guangxi Refining Oil Co., Ltd., with a total investment of over 10 billion yuan, annual processing of 10 million tons of crude oil, and Sinopec Qingdao Oil Refinery, with a total investment of approximately 12.5 billion yuan. Capacity is 10 million tons; CNOOC Huizhou has large oil refining; infrastructure investment is about RMB 19.3 billion; annual processing capacity is 12 million tons. The state will also adopt a park-based model to develop the ethylene industry. In the near future, seven ethylene projects will be launched. The ethylene production capacity in 2010 is expected to reach 5.83 million tons. These large-scale petroleum and petrochemical projects that were recently opened or planned will use a large number of related gas detection instruments and meters, especially high-performance and more advantageous infrared optical gas detection instruments.

While the demand for domestic petroleum and petrochemical products will continue to grow steadily, more and higher demands will also be placed on the quality and variety of petroleum and petrochemical products. The main components of crude oil are carbon, hydrogen, sulfur, nitrogen, oxygen, and compounds containing sulfur, oxygen, and nitrogen are harmful to petroleum products and need to be removed as much as possible in petroleum processing. This results in the production of carbon monoxide, sulfur dioxide, hydrogen sulfide and other toxic gases and the production of organic vapors such as benzene, aldehydes and ketones, which poses a threat to production safety and environmental protection. At present, gas detection and analysis methods are widely used to control gas leak detection in the production of flammable gases and monitoring of hydrogen, oxygen, and other environmental gases. Gas detection instruments are also required. It is estimated that on average, about 40 gas detection instruments and pressure calibrators need to be used for tens of thousands of tons of refined oil production, including 20 combustible gases (sets)? The current annual output of 220 million tons of refined oil is calculated as gas. The annual demand for testing instruments and meters is about 880,000 sets (sets), of which about 440,000 sets of combustible gas detection instruments (sets), about 220,000 sets of toxic gas detection instruments (sets), other organic vapor and gas analysis equipment, etc. 22 Million sets (sets). Various types of oil and gas stations are also in need of gas detectors for the detection of toxic gases such as combustible gases, carbon monoxide, sulfur dioxide, and hydrogen sulfide, and organic vapors such as benzene, aldehydes, and ketones. They are mainly used for safety protection, to prevent poisoning and accidents. On average, each gas station requires approximately 7.2 sets of gas detection instruments. In 2007, the total number of domestic gas stations had exceeded 100,000, and the annual demand for combustible gas detection instruments and meters was about 720,000 units (sets). Comprehensive analysis of the above data according to each set of gas detection instruments by 2,500 yuan analysis The current market size of gas detection instrumentation in the entire petrochemical industry is about 4 billion.

Angle Steel Bar

Angle steel, commonly known as angle iron, is a long strip of steel with two sides perpendicular to each other. The angle steel can be composed of various stress-bearing components according to the different needs of the structure, and can also be used as a connection between the components. Widely used in various building structures and engineering structures, such as beams, bridges, transmission towers, lifting and transportation machinery, ships, industrial furnaces, reaction towers, container racks, cable trench supports, power piping, busbar support installation, and warehouses Shelves etc.

Angle Steel Bar,Angle Steel,Angle Bar,Stainless Angle Bar

Shandong Rizhaoxin Metal Products Co., Ltd. , https://www.sdrizhaoxinsteel.com