In order to compensate for the difference between the specified tool diameter and the actual tool diameter, almost all CNC systems provide tool diameter compensation to ensure the exact size of the part being machined.
In the UG Planar Mill, Cavity Mill and WireEDM operations, you can activate the following menu:
By selecting the above menu, you can set tool diameter compensation.
Some CNC systems have certain restrictions on active tool diameter compensation. If it is not allowed to add tool compensation directly to the initial arc infeed, you must add a straight line infeed and use the tool by adjusting the Minimum Angle and Minimum Move. Diameter compensation. As shown below:
A hydraulic component that provides pressurized fluid for hydraulic transmission. It is a type of pump. Its function is to convert the mechanical energy of power machines (such as motors and internal combustion engines, etc.) into liquid pressure energy. There are many factors affecting the service life of the Hydraulic Pump, in addition to the pump itself design, manufacturing factors and some pump use related components (such as coupling, oil filter, etc.) selection, operation in the process of test run, etc.
Hydraulic Pump Lift Pump Assy,Tractor Loader Hydraulic Pump,Farmtrac Hydraulic Pump,Tractor Hydraulic Pump
YUHUAN CITY KANMEN DONGHAI AUTO PARTS FACTORY (GENERAL PARTNERSHIP) , https://www.donghaiqituo.com