â—† External power supply: 220V AC or 24V DC
â—† Input
Signal: Receive a signal from a VS Series Vibration Speed ​​Sensor
Sensitivity: 20mV/mm/s±5%
Frequency response: 5 ~ 300Hz
◆ Range: 0 ~ 500μm (peak - peak) or 0 ~ 50.0mm / s (true RMS)
â—† LED indication: OK green, Alert, Danger red.
◆ Measurement error: ±1% of full scale
◆ Current output: 4~20mA active, output load ≤500Ω
◆ Alarm point setting: 0~100% full scale, accuracy ±1%
â—† Alarm reset mode: automatic or manual (site reset button, remote alarm reset terminal)
â—† Relay seal: epoxy resin, node capacity DC30V/5A or 220V/5A, single pole double throw
â—† Power-on delay: about 10 seconds
◆ Temperature range: -25°C～+65°C during operation, -40°C～+85°C during storage
â—† Relative humidity: up to 95%, no condensation
Installation position: Install it vertically or horizontally on the vibration point to be tested. Fix the M10×1.5×10 screw on the bottom of the sensor to the tested housing, and then screw the sensor on it.
3.2 Installation Dimensions and Specifications: Refer to Figure 1. If the installation position of the transmitter is washed by high temperature steam, etc., in order to reduce the ambient temperature of the transmitter and provide protective measures, under normal circumstances, no protection is required.
The VB-Z210 integrated axial displacement signal transmitter is used with eddy current sensors and is widely used in large rotating machinery (such as steam turbines and compressors) in the power, metallurgy, petrochemical and paper industries.
Measurement and protection control of axial displacement of motors, fans, pumps, etc.
Fault monitoring monitors the axial displacement of the rotating machine rotor.
The position (displacement) of the parametric rotor relative to the bearing pad is measured.
Unit type
SWZF-001F split type vibration temperature transmitter vibration probe
External power supply: 220V AC or 24V DC
Technical indicators:
Signal: Receive signal sensitivity of a ST series vibration speed sensor: 20mV/mm/s ± 5%
Frequency response: 5 ~ 300Hz
Range: 500μm (peak-to-peak) or 0-50.0mm/s (true RMS)
LED indication: OK green, Alert, Danger red
Measurement error: ±1% of full scale
Current output: 4-20mA active, output load ≤500Ω
Alarm point setting: 0-100% full scale, accuracy ± 1%
Alarm reset mode: automatic or manual (site reset button, remote alarm reset terminal),
Following electrical sealing: epoxy resin, node capacity DC30V/5A or 220V/5A, single pole double throw
Power-on delay: about 10 seconds
Temperature range: -25°C to +65°C during operation
-40°C to +85°C during storage
Relative humidity: up to 95%, no condensation
Dimensions: 90W × 120L × 75Hmm
Installation size: 80×90mm
Weight: about 660g
JM-B-6Z monitoring and protection device, JM-B-6000 steam turbine monitoring and protection device, JM-B-3E dual-channel vibration monitoring and protection device,
SZC-04 series intelligent tachometer, SZC-04F series intelligent speed anti-rotometer, DZC-02A tachometer
PTFE (Polytetrafluoroethylene) is a synthetic fluoropolymer of tetrafluoroethylene that has numerous applications due to its unique properties. One of the most common forms of PTFE is PTFE rod, which is widely used in various industries due to its high purity and excellent chemical resistance.
Purity Material PTFE Rod is a type of PTFE rod that is made from 100% pure PTFE resin without any fillers or additives. This results in a product that has exceptional chemical resistance, high temperature resistance, and excellent electrical insulation properties. Purity Material PTFE Rod is ideal for use in applications where purity is critical, such as in the semiconductor, pharmaceutical, and food processing industries.
One of the key advantages of Purity Material PTFE Rod is its chemical resistance. It is highly resistant to a wide range of chemicals, including acids, bases, and organic solvents. This makes it an ideal material for use in chemical processing equipment, where it can withstand exposure to harsh chemicals without degrading or corroding.
Purity Material PTFE Rod also has excellent temperature resistance. It can withstand temperatures up to 260°C (500°F) without melting or degrading. This makes it ideal for use in high-temperature applications, such as in the aerospace and automotive industries.
Another advantage of Purity Material PTFE Rod is its excellent electrical insulation properties. It has a very high dielectric strength and low dielectric constant, which makes it an ideal material for use in electrical and electronic applications, such as in insulators, capacitors, and circuit boards.
In addition to its physical properties, Purity Material PTFE Rod is also easy to machine and fabricate. It can be easily cut, drilled, and machined to precise specifications, which makes it an ideal material for use in custom components and parts.
Overall, Purity Material PTFE Rod is an excellent choice for applications that require high purity, chemical resistance, temperature resistance, and electrical insulation properties. Its unique combination of properties makes it a versatile material that can be used in a wide range of industries and applications.
Ptfe Rod,Extruded Ptfe Rod,Teflon Round Bar,Ptfe Bar
Rayhot Technology Group Co,.Ltd , https://www.rayhotgroup.com