Engine Surface Degreaser, Cleaner for Car Care

ENGINE SURFACE DEGREASER

Features:
It has strong penetration and emulsifying decomposition effect, can rapidly remove oil stain, dirt, dust on the surface of the engine and keep it clean and new, which is good for heat-cooling of engine. It has no damage to parts of rubber, plastic parts and painting face. At the same time ,it can also be used to clean the generator and oil stains and dirt on the surface of the industrial machine and other equipment.
 
Directions:

1. Start the engine and run at a slow speed for 5 minutes and then shut it down.
2. Remove the air filter and cover the carburetor and distributor with plastic cloth.
3. Shake well and spray the surface of the engine, wipe with a wet cloth 5 mins later.

Precaution:
Don't place it inside the car. Keep out of reach of children.
If eyes contacted, rinse with water and go to the hospital immediately.
In case of accidental ingestion, consult physician immediately.
When spraying, keep the can upright, angel between the can and the level should be no less than 45 degrees.
Please run out before validity.
It must be stored below 40ºC, in a cool, dry area and away from sunlight, do not impact, burn or pierce the cans.
The gross weight and net weight will change over time and this is a common phenomenon for aerosol products. Wastage rate is no more than 2% yearly.

About Us
1. Technology and equipment
Brings in Britain KP system, Italian COSTER system, Switzerland PAMASOL system, and series of professional automatic aerosol created system. Tonyin group adhere to the philosophy of "Green environmental protection, High aspirations of success; Scientific and technical innovation, Unity is strength".
2. Certificate
It havs passed the identification of "ISO9001:2008 quality system", "ISO14001 environment system certificate", "Safe Production license of the dangerous chemicals" and "OHSAS18001 occupational,health and safety management system certificate". Auto Parts products have obtained CCC, DOT, ECE and GCC certifications etc. , and Car Care & Maintenance and Home Care products have passed SGS laboratory testing and achieved international qualieautifying and maintenance, car air treatment, fuel system conservation anty standards.
3. Products line
We have more than 120 kinds, 10 series of car detailing & cleaner products, for Glass, Tyres & Wheels, Paint, Cooling system, Engine, Air conditioner, Chassis, and Oil. for example: Headlight Restore, Windshield Washer Solvent, Wax, Spray Wax, Nano Chrome Paint, Nano Ceramic Coating, Tyre Sealent, Tyre & Wheel Cleaner, Leather Coating, Tyre Shine, Hand Soap, R134A, Wash & Wax (Shampoo), Carbon Cleaner, Lubricant, Gasoline Treatment, Injector Cleaner, Octance Booster, Brake & Parts Cleaner, Brake Fluid DOT-4, ATF Oil.....etc.
Due to the professional R & D team , the compnay continually keep launching new products and take the initiative in the markets.

Factory Overview:


Exhibition
 

ENGINE SURFACE DEGREASER

Features:
It has strong penetration and emulsifying decomposition effect, can rapidly remove oil stain, dirt, dust on the surface of the engine and keep it clean and new, which is good for heat-cooling of engine. It has no damage to parts of rubber, plastic parts and painting face. At the same time ,it can also be used to clean the generator and oil stains and dirt on the surface of the industrial machine and other equipment.
 
Directions:

1. Start the engine and run at a slow speed for 5 minutes and then shut it down.
2. Remove the air filter and cover the carburetor and distributor with plastic cloth.
3. Shake well and spray the surface of the engine, wipe with a wet cloth 5 mins later.

Precaution:
Don't place it inside the car. Keep out of reach of children.
If eyes contacted, rinse with water and go to the hospital immediately.
In case of accidental ingestion, consult physician immediately.
When spraying, keep the can upright, angel between the can and the level should be no less than 45 degrees.
Please run out before validity.
It must be stored below 40ºC, in a cool, dry area and away from sunlight, do not impact, burn or pierce the cans.
The gross weight and net weight will change over time and this is a common phenomenon for aerosol products. Wastage rate is no more than 2% yearly.

About Us
1. Technology and equipment
Brings in Britain KP system, Italian COSTER system, Switzerland PAMASOL system, and series of professional automatic aerosol created system. Tonyin group adhere to the philosophy of "Green environmental protection, High aspirations of success; Scientific and technical innovation, Unity is strength".
2. Certificate
It havs passed the identification of "ISO9001:2008 quality system", "ISO14001 environment system certificate", "Safe Production license of the dangerous chemicals" and "OHSAS18001 occupational,health and safety management system certificate". Auto Parts products have obtained CCC, DOT, ECE and GCC certifications etc. , and Car Care & Maintenance and Home Care products have passed SGS laboratory testing and achieved international qualieautifying and maintenance, car air treatment, fuel system conservation anty standards.
3. Products line
We have more than 120 kinds, 10 series of car detailing & cleaner products, for Glass, Tyres & Wheels, Paint, Cooling system, Engine, Air conditioner, Chassis, and Oil. for example: Headlight Restore, Windshield Washer Solvent, Wax, Spray Wax, Nano Chrome Paint, Nano Ceramic Coating, Tyre Sealent, Tyre & Wheel Cleaner, Leather Coating, Tyre Shine, Hand Soap, R134A, Wash & Wax (Shampoo), Carbon Cleaner, Lubricant, Gasoline Treatment, Injector Cleaner, Octance Booster, Brake & Parts Cleaner, Brake Fluid DOT-4, ATF Oil.....etc.
Due to the professional R & D team , the compnay continually keep launching new products and take the initiative in the markets.

Factory Overview:


Exhibition
 

Soap Dispenser

A soap dispenser generally includes a tap fixed on the countertop, a soap bottle set under the countertop, a dispenser mechanism for hydraulically discharging the soap in the soap dispenser, and a pressure button for driving the dispenser mechanism. Generally, the soap dispenser is matched with the sink and installed near the tap of the sink. When installing the soap dispenser, you need to check whether the sink has a soap dispenser hole, otherwise it cannot be installed.

Soap dispensers are mainly used in star hotels, restaurants, hotels, public places, hospitals, airports, home furnishings, pharmaceuticals, food, chemicals, electronics, high-end office buildings, large shopping malls, large entertainment venues, large banquet halls, hot spring resorts, kindergartens, For schools, banks, airport terminals, families, etc.

Automatic Soap Dispenser,Hand Soap Dispenser,Foaming Soap Dispenser,Dish Soap Dispenser

Sung Precision Mould & Plastic Co., Ltd. , https://www.injectionmoldingfactorys.com