Explain the operating rules of the cutting machine

(B), power switch blade, blade tension, blade guard or safety baffle for detailed inspections, the console must be stable, at night operation should have sufficient lighting brightness.

(3) Before use, turn on the main switch first, turn the unloaded test a few times, and allow it to start before it is confirmed to be safe.

(D), before the operation must check whether the power supply and power tools on the regular rated 220VA voltage in order to avoid wrong connection to the 380VA power supply.

Second, cutting precautions

(1) When the cutting machine is working, it must be engrossed in not only keeping the head clear, but also rationally operating the electric tools. It is strictly prohibited to exercise the cutting machine after exhaustion, drinking or taking stimulants and drugs.

(B), the power line must be safe and reliable, it is forbidden to pull privately, be careful to place the power cord, do not be cut off. Before use must carefully check the performance of the equipment to ensure that all parts are in good condition.

(C), wear appropriate overalls, can not be worn through loose overalls, not to wear jewelry or long hair, no gloves and cuffs are not allowed to operate.

(D), the workpiece must be firmly clamped, and it is forbidden to start cutting without clamping the workpiece.

(5) It is forbidden to grind the burrs of the workpiece on the plane of the grinding wheel to prevent the grinding wheel from chipping.

(f), the operator must deviate from the front of the wheel and wear protective glasses when cutting.

(7) It is strictly forbidden to use already worn wheel discs. When cutting, Mars should be prevented from splashing and away from flammable and explosive materials.

(8) When clamping the workpiece, it should be clamped steadily and firmly. The protective cover must be installed correctly. After installation, check the power supply and turn it on. It should be free from jitter and abnormal noise.

Metal Body Square Water Cooling Tower

This series of products run stable, low noise, energy-saving, in office buildings, shopping malls, hotels, residential areas and other central air-conditioning supporting the use of better results.

The company's standard cooling tower according to the international design conditions design, can also provide customers with non-standard operating conditions or specific sizes under the special, special design.

The circulating water pump suction port shall be located below the water level of the cooling tower catchment basin, and the cooling tower outlet pipe shall not be allowed to be higher than the maximum water level of the catchment basin.
Pipe mounts should be pipe racks and cooling towers should not be allowed to directly bear the weight of the pipes.

The rehydration pipe of the cooling tower should be provided with a support stand to avoid vibration of the pipe when the float valve is rehydrated.

Rehydration pressure should be below 5m water pressure, national standard
The flannage pressure is 1.0Mpa.

When two or more units are assembled, our company will provide a connecting balance tube to balance the chassis water level. The tower top inlet should be set with a conditioning valve in order to enter each
.The water level of the tower is uniform.


The noise is measured at dm1.13VL-W at the equivalent diameter of the cooling tower (Dm1.13VL*W), 1.5 meters above the ground height, wherein L and W are the shape rulers of the tower
inch long and wide).

The use of cellular continuous blister series of diversion,heat dissipation, water collection three-in-one native filler, the whole suspension, gravity cloth water, low drop of water, with cold effect
High, low energy consumption, less drift water, less noise and so on, floating water rate is less than 0.001%.

When connecting different types of towers, the bottom basin water level height of different types of towers must be taken into account, and the base height must be adjusted to maintain the water level balance of the towers.

Metal Body Square Water Cooling Tower,Tower Water Cooler,Water Cooled Cooling Tower,Tower Cooling System

Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.arkfluid.com