1,Structure of equipment
This line is composed of de-coiler, punching, forming machine, cutting system, electric control system, etc.
2, Equipment composing parts
Equipment is composed of de-coiler, feed system, gap and cut off, forming machine, collection table, electric control system, etc.
3, Technical parameter of equipment main parts
3.1, Auto-decoiler
A, Load capacity: 2 T
B, Inner diameter of coil: 490-510mm
Outer diameter≤ 1200mm
3.2. Servo feed and punching unfilled corner parts
A, Servo motor: Used Mitsubishi Servo motor, power: 1.0kw
B, Punching unfilled corner die: 4 pillars punching die
C, Material of punching die: Cr12. Quenching treatment
3.3Feeding:
Power 0.37kw
3, 4Forming machine
A, Forming frame
B, Material of forming mould: GCr15, quenching treatment: Rigidity: HRC56-62º
C, Motor: 7.5kw frequency conversion engine
4, Electric control: PLC system
The operator can do the following
The setting program (PLC)
Monitoring the control process,
Modify the control parameters,
The length of the workpiece digital setting,
The length of the workpiece adjusting.
Running state real-time monitoring equipment and fault indication.
 2- Mode of operation: manual / auto two. With manual, automatic switching function: in the manual mode, can be stand-alone operation, convenient repair; in the automatic mode, all production and operation, the start up sequence; along with the emergency stop button, easy to handle emergencies, to ensure the safety of equipment and personnel
Main Machine Technical parameter
|
NO. |
 Project |
 Unit |
 parameters |
 Remark |
|
| Â 1 |
 Material |
type | Â | Mild steel,Galvanized sheet | Â |
| Strengthof material sheet | Map | ≥350 |  | ||
| Thickness of material sheet | mm | 0.8~1.5 | Â | ||
| 2 | Size of production | mm | Reference the picture | Â | |
| 3 | Production speed | m/min | 6~8 | Â | |
| 4 | Material of roller | Â | GCr quenching treatment | Â | |
| 5 | Drive type | Â | Gear box | Â | |
| 6 | Power | kw | About 34 | Â | |
| 7 | Electric control system | Â | PLC variable frequency control | Â | |
| 8 | Dimensions(Length*width*height) | m | 28X4X3.9 | Â | |
3,Profile
4,Delivery of Machine
5,Our Service
BOSJ offer engineers to install and commission the machines at buyer's factory,and also trainyour workers to operate the machine.
a.One year guarantee for whole machine.
b.24 hours technical support by email or calling
c.Mechnical engineering team with 10 actual working experience
d.Electrical engineering team with 10 actual working experience
6,Company Information
BOSJ is a professional and leading roll forming machine manufacturer,we have a 15 years working team to work with  you.
Near Shanghai....
Warmly welcome you to visit our factory!
Contact me
JIANGYIN Bosj S& TÂ Co., Ltd
Factory:No.9 Xiangdun Road,Huashi Town,Jiangyin City,China
Website: www.bosj.com.cn
Â
1,Structure of equipment
This line is composed of de-coiler, punching, forming machine, cutting system, electric control system, etc.
2, Equipment composing parts
Equipment is composed of de-coiler, feed system, gap and cut off, forming machine, collection table, electric control system, etc.
3, Technical parameter of equipment main parts
3.1, Auto-decoiler
A, Load capacity: 2 T
B, Inner diameter of coil: 490-510mm
Outer diameter≤ 1200mm
3.2. Servo feed and punching unfilled corner parts
A, Servo motor: Used Mitsubishi Servo motor, power: 1.0kw
B, Punching unfilled corner die: 4 pillars punching die
C, Material of punching die: Cr12. Quenching treatment
3.3Feeding:
Power 0.37kw
3, 4Forming machine
A, Forming frame
B, Material of forming mould: GCr15, quenching treatment: Rigidity: HRC56-62º
C, Motor: 7.5kw frequency conversion engine
4, Electric control: PLC system
The operator can do the following
The setting program (PLC)
Monitoring the control process,
Modify the control parameters,
The length of the workpiece digital setting,
The length of the workpiece adjusting.
Running state real-time monitoring equipment and fault indication.
 2- Mode of operation: manual / auto two. With manual, automatic switching function: in the manual mode, can be stand-alone operation, convenient repair; in the automatic mode, all production and operation, the start up sequence; along with the emergency stop button, easy to handle emergencies, to ensure the safety of equipment and personnel
Main Machine Technical parameter
|
NO. |
 Project |
 Unit |
 parameters |
 Remark |
|
| Â 1 |
 Material |
type | Â | Mild steel,Galvanized sheet | Â |
| Strengthof material sheet | Map | ≥350 |  | ||
| Thickness of material sheet | mm | 0.8~1.5 | Â | ||
| 2 | Size of production | mm | Reference the picture | Â | |
| 3 | Production speed | m/min | 6~8 | Â | |
| 4 | Material of roller | Â | GCr quenching treatment | Â | |
| 5 | Drive type | Â | Gear box | Â | |
| 6 | Power | kw | About 34 | Â | |
| 7 | Electric control system | Â | PLC variable frequency control | Â | |
| 8 | Dimensions(Length*width*height) | m | 28X4X3.9 | Â | |
3,Profile
4,Delivery of Machine
5,Our Service
BOSJ offer engineers to install and commission the machines at buyer's factory,and also trainyour workers to operate the machine.
a.One year guarantee for whole machine.
b.24 hours technical support by email or calling
c.Mechnical engineering team with 10 actual working experience
d.Electrical engineering team with 10 actual working experience
6,Company Information
BOSJ is a professional and leading roll forming machine manufacturer,we have a 15 years working team to work with  you.
Near Shanghai....
Warmly welcome you to visit our factory!
Contact me
JIANGYIN Bosj S& TÂ Co., Ltd
Factory:No.9 Xiangdun Road,Huashi Town,Jiangyin City,China
Website: www.bosj.com.cn
Â
Automatic Medical Airtight Doors
medical airtight door, radiation protection , fire protection ,, thermal insulation
SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfahsrud.com