Horizontal and Wet Drinking Water Meter

• Model NO.: LXS-(15~50)mm
• Medium Temperature: Cold Water
• Counter Instructions: Digital
• Application: Civil, Industrial
• Medium Pressure: General Water Meter
• Stucture: Traditional

• Install: Horizontal
• Level Measurement: B
• Nominal Diameter: 15-50mm
• Principle: Speed of Water Meter
• Work Environment: Wet Water Meter
• Origin: Zibo

Multi-jet Dry Type Vane Wheel Water Meter
It is a multi-jet super dry water meter for residential application in sizes 15mm-50mm for cold meter.
FEATURES:
Magnetic Drive, lower transmission resistance 
Magnetic Shield , for external magnetic field protection
Sealed dry dial register ensures clear reading 
Internal strainer, inlet strainer for selecting 
External regulating device
Standards Compliance 
Directive 2004/22/EC on measuring instruments; the European  Standard EN14154+A1+A2: Water Meter; the International  Organization of Legal Metrology OIML R-49: 2006(E)
Optional Features 
Several lengths and connections available on request
Non return Valve
Reed switch option
Working Conditions
Water temperature: ≤50ºC for cold water meter  
Water pressure:   ≤1MPa or 1.6MPa optional
                 (10bar or 16bar option)
Installation requirements
The meter should be installed in horizontal position with the direction of the flow as 
indicated by the arrow cast in the meter body with the register face upwards.
Pipeline must be flushed before installation.
The meter should be constantly full of water during operation.
MAXIMUM PERMISSIBLE ERROR
In the lower zone from Qmin inclusive up to but excluding Qt is ±5%.
In the upper zone from Qt inclusive up to and including Qs is: cold water meter ±2%.
ACCESSORIES
Each water meter has one set couplings optional: 2pcs tube, 2pcs nut and 2pcs gasket
  

. Installation and maintenance methods
1. Select the water meter according to the pipe diameter and flow size of the installation site.
2. The installation location should avoid exposure to the sun, water, freezing and pollution. In rainy season and winter, anti-rain anti-freezing measures should be taken.
3. Remove the hemp and gravel in the pipeline before installation, so as not to cause water meter failure.
4. When installing, valve should be installed in front of the meter in order to cut off the water table.
5. The LXS type water meter should be installed horizontally and the dial should be in the direction of the direction of the direction of the flow direction.
6. Water meter, if installed in the boiler, should prevent hot water from returning to the hot water meter (see picture below).



V. complete set
Attach the pipe joint, connecting nut and seal gasket to each of the water meter, using the instruction manual and the certificate each.
Six, services,
1, the use of our water meter a year, every reasonable install, use the traffic is normal, is the interior damage or malfunction caused by manufacturing quality (with the exception of freezing), and in keeping the seal under the condition of complete, the factory can be responsible for the repair, exchange, and pay for round trip (mail).
2, who use our products to repair units, such as water plant, industrial and mining enterprises, etc., our factory supply repair parts, but must sign a contract with our factory sales department, the contract and parts atlas on application to our factory.
Address: no. 1, star road, zhonglou street, zibo district, zibo city, shandong province
Telephone: 0533-5184997
After-sales service hotline: 0533-5184997
Fax: 0533-5188198 postcode: 255100