In recent years, with the rapid development of industry, multi-station machine tools are used as a high-efficiency, high-performance, high-precision and low-cost drilling and tapping device in automobile and motorcycle accessories, hardware manufacturing, plumbing valves, electronic appliances, etc. An industry has been widely used. And created great economic benefits. How to maintain multi-station machine tools?
1.Before using the multi-position machine tool, you must be familiar with the installation, commissioning and maintenance of the machine tool. Before starting the machine, you should check whether the components are in good condition, whether the movement is flexible, whether the workpiece is clamped, and whether the operation is safe. After confirming that the empty car will be opened for five minutes, high-speed cutting will require 15 minutes of empty car for machining.
2, multi-position machine tool spindle using high-speed grease, use a period of time should be disassembled the main shaft with kerosene to clean the bearings and then apply high-speed grease.
3, the machine uses 32 # mechanical oil, at least 2 times each shift.
4, the machine must be kept clean, immediately evacuated, the active site does not allow water and dirt.
5. Clean up the column regularly, at least once per week. 6. Clean the work surface every day.
7. Clean the electric turntable after finishing it every day, and remember to add at least two lubricants per week.
8. Clean the multi-axis machine every day and remember to add oil.
9. Clean the electrical box and motor every day, check the position of the electrical device, ensure that the electrical device is fixed, safe and tidy, and maintain ventilation. Check that the ground is intact.
1.Before using the multi-position machine tool, you must be familiar with the installation, commissioning and maintenance of the machine tool. Before starting the machine, you should check whether the components are in good condition, whether the movement is flexible, whether the workpiece is clamped, and whether the operation is safe. After confirming that the empty car will be opened for five minutes, high-speed cutting will require 15 minutes of empty car for machining.
2, multi-position machine tool spindle using high-speed grease, use a period of time should be disassembled the main shaft with kerosene to clean the bearings and then apply high-speed grease.
3, the machine uses 32 # mechanical oil, at least 2 times each shift.
4, the machine must be kept clean, immediately evacuated, the active site does not allow water and dirt.
5. Clean up the column regularly, at least once per week. 6. Clean the work surface every day.
7. Clean the electric turntable after finishing it every day, and remember to add at least two lubricants per week.
8. Clean the multi-axis machine every day and remember to add oil.
9. Clean the electrical box and motor every day, check the position of the electrical device, ensure that the electrical device is fixed, safe and tidy, and maintain ventilation. Check that the ground is intact.
This is Standard 3D Wheel Alignment with camera beam, targets and wheel clamp. It is for sicssors car lift. HD cameras makes the measurement result and adjustment more precise. We offer 3D Wheel Alignment OEM and ODM. We have R&D history of 8 years for distributers both in and out. All key parts have three years guarantee.
Standard 3D Wheel Alignment
Standard 3D Wheel Alignment,3D Wheel Alignment Machine,Easy 3D Wheel Alignment,Smart 3D Wheel Alignment
Shenzhen Sucvary Tech Co., Ltd. , https://www.syalignment.com