[China Instrument Network Instrument R&D] Recently, under the organization of the Shanghai Science and Technology Commission, Shanghai's well-known analytical instrumentation experts conducted the Shanghai High-throughput Thin-layer Chromatographic Scanner Development project undertaken by Shanghai Corzine Biochemical Technology Co., Ltd. Expert acceptance.
The acceptance expert group carefully listened to the report summary made by the person in charge of the project, reviewed relevant technical data such as project technical reports, third-party test reports and expert assessment reports, visited the on-site demonstration of the instrument, and fully affirmed the results achieved by the project team. And highly rated.
TM-1000 High Throughput Thin Layer Chromatography Scanner
Mass spectrometer has become the main qualitative instrument in life sciences, food safety, and pharmaceutical field. However, the pretreatment is complicated and the analysis cycle is long. Recently, the developed countries have developed a thin layer chromatography-mass spectrometry system, which has simple sample preparation and direct extraction of thin The target spot composition on the plate is directly entered into mass spectrometry. High efficiency of analysis, especially for rapid qualitative analysis. The key to this technology is the TLC-MS interface, which is still in a blank state in China.
TM-200 Thin-Layer Mass Spectrometer Interface
The project team independently researched and developed and completed the first thin layer analysis pretreatment instrument capable of accomplishing sample extraction on a large batch of thin-layer plates: a high-throughput thin-layer chromatography scanner. The sub-topic "TLC-MS interface" included in this research project fills the gaps of related instruments in China, and can efficiently perform mass spectrometry sample pretreatment and support high-throughput mass spectrometry analysis. Shanghai Kezhe Biochemical Technology Co., Ltd. It has become the third analytical instrument company to introduce such instruments in the world, and the launch time is not far from the corresponding products of foreign companies, demonstrating the strong technical development capabilities of Shanghai Kozhe Biochemical Technology Co., Ltd.
The instrument is equipped with three different types of sampling heads that support a variety of spotting samples and extends the scope of application of the instrument. The instrument is simple and convenient to operate, and the sample spots can be extracted and transmitted to mass spectrometry for mass spectrometry analysis, which saves time and effort compared to traditional methods. Applicable to medicine, scientific research institutions, third-party testing agencies, Chinese medicine research, food safety, environmental monitoring and so on. The instrument has been tested at universities in Fudan University and other universities, and the results of the experiment are good.
(Original Title: Shanghai Kozhe Biochemical Technology Co., Ltd. Fills the National Blank Again)
PVC Edge Banding For Furniture
The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.
The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.
Furniture edge banding is a material for protecting, decorating and beautifying the section of furniture panels. It can make a piece of furniture show the overall effect of clear wood grain and colorful.
PVC furniture edge banding is relatively light, which is relative to metal and plexiglass. The reason for the lightness is not because it is a polymer compound, but because they are organic compounds, which are composed of carbon, hydrogen, oxygen, and chlorine. And other lighter elements.
The material of pvc furniture edge banding is plastic, which is easy to process. Plastic has plasticity, that is, it deforms after heating or pressurizing, and maintains its original shape after the temperature drops or the pressure disappears. It can be processed into edge bands of their respective shapes by extrusion and other methods, such as T-shaped edge bands, H-shaped edge bands, D-shaped edge bands, V-shaped edge bands, I-shapes, and so on.
pvc furniture edge banding is of high quality and low price, and the price of plastic is far less than that of metal.
PVC Edge Banding For Furniture,Pvc Edge Banding For Furniture, Edge Banding For Furniture,Pvc Edge Banding Tape
Henan Shunbang Chemical Industry CO.,Ltd , https://www.suspensionpvc.com