The oil is too high. The old driver tells you not to do this.

As the saying goes, "Oil can be added less, not more." If riders accidentally add more oil, they must be dealt with as soon as possible to avoid causing more serious losses. Under normal conditions, the normal level of oil is between the upper limit and the lower limit of the oil dipstick. Lower than the lower limit will result in low oil pressure and may result in poor lubrication, but short-term use will not have a particularly serious impact on the engine. If the oil is increased, the internal pressure of the engine will be too high, and the excess oil will be pumped into the combustion chamber due to high pressure, causing insufficient combustion, forming a large amount of carbon deposition, and also increasing the internal resistance of the engine, resulting in engine acceleration. Chang, the internal oil seal leaks, when serious, it will develop into the phenomenon we least want to see is "burning machine oil."

Treatment method:

The owner can drive the car to the nearest repair shop or 4S shop, insert the oil pump tubing into the oil dipstick, and pump the extra oil out. The cost will be a few tens of dollars. If it is a repair site for maintenance, You have added more and went to him. I believe they are too embarrassed to collect your money.

There are also some internet users who have created their own method of pumping oil. Car owners can consider emulating it. For example, to find a long hose and a large-capacity syringe, insert the long pipe into the oil dipstick to extract the excess oil. Although this move seems less professional, it is still relatively effective.

Precautions:

But the prerequisite is that you don't scatter the oil to other places, otherwise it will be more troublesome to clean it up, especially to the belt, then you will have a cup. There is a high temperature of the engine oil. When it is too hot, do not operate it. Be careful of yourself.

Examine some oil levels after pumping. The most standard inspection method is to wait for about 10 minutes after the hot car is turned off and then pull out the oil dipstick. The oil level shown here is the most accurate.


Vertical Injection Machine

Vertical Injection Machine,Vertical Moulding Machine,Vertical Plastic Moulding Machine,Vertical Plastic Injection Machine

JIANGYIN HENTOL NEW MATERIAL CO.,LIMITED , https://www.hentolgroup.com