· Volvo luxury car platform will launch the first car in China

Recently, Jenswardell, director of equipment technology at the Volvo Daqing plant, revealed that the new model will be mass-produced and put on the market next year. The car will be the first luxury sedan produced by the SPA platform in China, and more luxury cars will be launched later. In this regard, Netcom had previously learned from the Daqing Development and Reform Commission: the first model will be named S90L, the car will be extended on the basis of Volvo's new mid-size sedan S90, competitors will lock the BMW 5 Series Li and other large and medium luxury cars.
In Volvo's production system, the company has two architectures, one is SPA and the other is CMA platform, in which CMA architecture is mainly used to produce small cars, that is, 40 series and below, while SPA modular architecture is used for production. 60 series of mid-size cars and 90 series of luxury car products. With the Volvo SPA modular architecture settled in the Daqing plant, the production base has the ability to produce the new 60 Series-90 series. According to Volvo's previously announced plan, the first model of the plant will be officially mass-produced and launched next year. The car will enter the medium and large luxury car market, mainly competing for BMW 5 Series Li and Audi A6L. After the S60L is made, Volvo will Reinforce the strength in the medium and large luxury car market.
According to Volvo's product planning, starting from the new generation of XC90, the Volvo brand will be upgraded in 2017. The Volvo flagship sedan S90 will be officially launched next year, the same as the new XC90, which will also be equipped with the latest Drive-E power system. For the models put into production in the Chinese market, Dennis Nobelius, vice president of Volvo Vehicle Line 90, has revealed that the next-generation S80 will be named S90, and Volvo will also launch the extended version of the S90L for the Chinese market.
In terms of power, the Volvo S90L will still use the Drive E intelligent engine cluster, which will be close to the engine power parameters of the new XC90. In the 2.0T engine equipped with the new XC90, it is divided into 2.0T T5, 2.0T T6 and other engines according to the adjustment. The T5 model has a maximum power of 180 kW and a peak torque of 350 Nm. The T6 has a maximum power of 235 kW and a peak torque of 400 Nm. In addition, the Volvo S90L is also expected to be equipped with plug-in hybrid power, which consists of a T6 engine and a motor, the fuel consumption of the vehicle is expected to be only 2.1L, far lower than the use of traditional gasoline-powered models.
After entering the domestic automobile market, S90L will enter the luxury medium and large vehicle segment. In this field, the Audi A6L and the BMW 5 Series Li have the same choice to lengthen the vehicle and the length of the vehicle exceeds 5 meters. This approach undoubtedly meets the domestic consumers' demand for interior space. Prior to the S60, the S60 was introduced in the extended version. Therefore, after the implementation of the Volvo S90, it is expected to continue the trend of lengthening the body. After the domestic production, the length is expected to be greater than 5000mm, and then compete with this level of the Audi A6L.

High accuracy, fully welded, painted construction can be used for trailing Suction Hopper Dredger.

Load pipe plays an important role, transport the dredge mixture to the hopper, then transmit through the load box pipe, to other position.

Dredger Structure pipe with high quality including Loading Box, Jet Pipe , Suction Pipe, spud, riser pipe, flange pipes etc.

Photo of our Loading Box:

Construction and procedure

The construction is to be built according to the drawing with rules of good workmanship.

With wear plate welded in inlet tube to ensure the long service life

According to the different function, normally load pipe has 1 inlet tube or 2 inlet tubes

On main pipe part, there will be several exit holes.

Materials

All fabricated steelwork used in the construction of the load box pipes will be to manufacturing standard of normal or classification society.

All materials proposed will be selected to comply with the latest Health and Safety Rules.

Paint systems for hull protection will be of the highest quality (Hempel, Inter, Sigma, Jotun)

Welding

All welding will be performed in accordance with drawing and order and UniSite experience and all welding will be continuous and full penetration.

Workmanship

The workmanship have good marine practice. Care are taken to ensure fair lines, smooth surfaces and neat welding.

Main particulars

H. Certificates

- Material certificates by a classification society EN10204 3.1

- Inspection protocol

- NDT reports

- Fixed certificate: ISO9001, BV certificate, CCS certificate

Loading Box

Steel Loading Box,Wear Resistant Loading Box,Customized Loading Box,Dredger Structural Pipe

Unisite Group Ltd. , https://www.unisitemarine.com