In search of a car to find a manufacturer of suction trucks, it is finally possible to bring three-wheel suction trucks back. Before accepting the three rounds of suction trucks, we must be cautious; otherwise, we will bring some serious losses in the later use of vehicles. Then when accepting the three-wheel suction truck, what friends should be there?
1. After the three-wheel suction trucks are extracted, first of all, the drivers do not start loading or unloading things so quickly. Some of the people who will be away from the car will be inspected carefully for some of the appearance problems of the three-wheel suction truck. The acceptance criteria is that for the three-wheel suction truck in the process of transportation, there will not be any deformation or detachment of the paint surface caused by extrusion. If there is any damage or After some problems with the damage, it is necessary to solve these problems with the sales or the person in charge of the manufacturer.
2, after the relevant standard acceptance in accordance with the above step by step to solve the problem, the following began to drive the three-wheel suction truck to try to see if the three-wheel suction truck on the various mechanical equipment operation is not all With good conditions, the main part of the three-wheel suction truck is the need to pay attention to the problem of the vacuum pump of the vehicle. It is necessary to test the pumping force and performance of the vacuum pump to see if the relevant speed of transportation can Satisfy your own needs and safety.
3, the appearance of the three-wheel suction truck is good, it is also after the test drive, the owner also needs to buy the three-wheel suction truck between the various properties and parameters are not in a safe confirmation, and finally is The check-in and check-out architecture is not correct. One of the issues involved is that the vehicle architecture is already the quality of the vehicle's tires.
Lightweight cars have a more prominent effect on the improvement of automotive energy efficiency. Aluminum alloy Automotive Parts can effectively reduce the weight of the vehicle while balancing the quality, strength, performance, cost, and safety of the vehicle, thereby reducing engine load. Improve the vehicle's dynamic performance, reduce fuel consumption and reduce greenhouse gas emissions. Therefore, the use of Automobile Aluminum Die Casting Parts has become recognized as one of the most effective means to achieve vehicle weight reduction.
High Precision Aluminum Die Casting Parts including:
• Engine System
• Chassis System
• Body System
• Electrical System
• Etc
Other Automobile Aluminum Die Casting Part
Automobile Aluminum Die Casting Part,Motorcycle Aluminum Die Casting Cylinder,Motorcycle Aluminum Die Casting Crankcase Cover
Zheke Mould Technology Co. Ltd. , http://www.zkdiecasting.com