Whether you are driving or riding, the first thing you should do when you get on the bus is to wear a seat belt. No matter how good the driver's technology is, the safety belt is the first code for safe driving. Of course, wearing a seatbelt is not just a matter of simply pulling it down and pulling it down. Xiaobian then brings you to the correct use of the seatbelt.
Adjusting the level is the first step in securing the seat belt. It is necessary to adjust the height of the seat belt. If it is too high, the neck can easily be stretched during an emergency and it may cause unnecessary injuries. If it is too low, it may not completely restrict the body from rushing forward. If it slides out of the shoulder, it is more dangerous.
Everyone has a difference between tall, fat, and thin. Moreover, the position of the seat belts of the vehicle and the car are also different. Therefore, adjust your seatbelt to your body.
Between the high and low points of the seat belt, there is an adjustment range of about 10cm.
If the seatbelt height is too low, you may not be able to completely restrain your body during emergency braking and may even fall off your shoulders.
Special people are wearing seatbelts
1. If it is a petite girl, it is recommended to lower the position of the seat belt, otherwise it may cause other injuries to the neck.
2. When the child rides on a car, it must be accompanied by a child safety seat. If the child does not already apply the child safety seat, but the car seat belt has a danger to the neck, you can use a child to increase the seat cushion. seat belt. Children need to pay attention to the following points:
The seatbelt straddles the child's shoulders instead of the arms, diagonally across the chest;
The belt should cross the base of the thigh instead of the child's abdomen, so as to avoid hurting the child's abdomen;
If children are not tall enough, they must use a raised cushion or raise their seats to raise their bodies.
3. For pregnant expectant mothers, do not put the seat belt on the stomach, this is very dangerous, the fetus is very fragile, this power is terrible! Avoiding him tied to the cheekbones may cause some discomfort, but it is still safest.
It should be noted that the seat belts in the rear seats are equally important. Although the rear seat belts are rarely adjusted, the overall position is not as bad as the front row. Due to cost constraints, mid-to-low-end models are generally equipped with a two-point seat belt at the center of the rear row. It is not as perfect as a three-point seat belt, and does not have a retractor mechanism. It can only fix the shin section of a person and the upper body cannot be fixed.
But this is also much stronger than sitting in the back row. After all, in an emergency, it protects you from letting you fly to the front windshield. In fact, many Chinese buses and buses are equipped with this type of seat belts.
Put the seatbelt in the keyhole and lean against the back; insert the front passenger seatbelt into the lock hole; use the clip to hold the seatbelt at the root to fix the length, then gently rest on the body, etc. These are all deceptive Wrong practice. The seat belts are used to ensure the safety of the people in the vehicle, not to the traffic police or monitor probes!
Overview of the UTECH CO2 Laser Cutter
Product Description:
CO2 Laser Engraver is special for some vertical materials, it mainly used in the vertical tomb industry, this machine can be fixed onto the tomb for some engraving work, also can do some normal cutting and engraving work.Applicable materials:
Rubber, Marble, granite, jeans, fabric, acrylic, MDF, wood, bamboo, organic glass, crystal, plastic, garments, paper, leather, rubber, ceramic, glass and other non-metal materials, etc.
Applicable industries:
Advertisement, gift, shoes, toys, computers, garments, model cutting, building, packaging, paper industry, etc.
Advantages of UTECH Laser Cutting Machine:
1. Ball screw transmission
Compared with belt transmission , high precision with fast speed.
2. Stepper motor and river
Standard machine equipped with stepper motor and driver, also can choose hybrid or other servo motor and driver.
3. Ruida 6332M control system Controller
1) Original new version Ruida 6332M control system, support DSP control.
2) High speed USB data transmission interface, download speed is up to 500kb/s
3) The control panel has 12 language for optional,such as Chinese,English,French, Portuguese, Spanish, Russian, German, Korean,Japanese and so on.
4) It supports multiple graphic formats, such as PLT / DXF / BMP / JPG / GIF / PGN / TIF and so on.
5) This machine is equipped with Control System for CorelDraw/AutoCAD and other advance software.
6) Very easy-operating control board and you can also see the engraving path from the control board.
4. Professional Laser headJust one year time,we have improve the laser head three times ,many factory is still use the first
or second one.
At present the latest generation is the most perfect of laser head, compared to the previous two generations, it has many advantages ,such as higher precision, better stability,more convenient to adjust.
And it is also the most popular design for customers.
5. Co2 Laser Tube ( Original Reci laser tube , Best brand in china )
Using life :8000-10000 hours
Global Warranty 12 months
6. Bracket of co2 laser tube
We not only use the best brand laser tube, in order to make the laser tube to play the best results ,for the auxiliary components ,we have also made constantly improvements, such as laser tube bracket, lens bracket, etc.
7. Laser supplier matched with the laser tube
Laser power supplier installed Independent , compared with the general install together with other Electrical Equipment, it can reduce interference of other
Electrical Equipment this can ensure the better performance of the laser power.
8. 550W exhaust fan
9. Water pump or Water chiller CW3000/5000/5200
To Cool Laser tube and Longer the lifetime of Laser tube.
Supporting upgradation to CW6000 with extra payment.
Package:
Every machine is packed with great care and tough material.
It is packed with cling films first and then film bags.
At last, it is packed with wooden case which is reinforced with the iron bar on the top and bottom.
With this kind machine, all our Laser Machine can protect well during long trip by sea or by train.
We can transport machine by boat or by training, according to your requirement.
<
Model
UTECH Laser cutting machine
Working area
1300*900mm/1300mmx2500mm, etc
Laser Types
Seal CO2 LaserTube
Laser power
130W/150W/180W/260W
Engraving speed
100-600mm/s
Cutting speed
0-30mm/s
Location precision
≤0.01mm
Resetting positioning accuracy
0.01mm
Power supply
AC110- 220V/50-60HZ
Controlling software
RDCAM
Operating temperature
0 - 45°
Operating humidity
5-95%
Minimum shaping character
English 1 x 1mm
360°slope engrave
Yes
Driving system
Stepper
Cooling mode
Water-cooling and protection system
Auxiliary Devices
Exhauster and the Exhaust Pipe
Software
RDCAM V6.0
Graphic format supported
BMP, CIF, JPEG, TGA, TIFF, PLT, AI, DXF, DWG,etc
Optional
Atuomatic feeding system, rotary axis, auto-focus
Laser Cutting Machine
Laser Cutting Machine,Laser Cutter,Mini Laser Cutting Machine,Co2 Laser Cutting Machine
Shandong U-May CNC Technology Co., Ltd. , https://www.fiberlasers.de