| The Bosch R&D team is developing a brake caliper combined with a motor for mass production. The caliper took over the role of the original parking brake. With this solution, automakers will be able to use one button to replace the now widely used robotic brake levers. In this way, you can save space on the center console for storage and manipulation. Bosch's new product APB-M (Automatic Parking Brake - Electromechanical Brake) is extremely comfortable for the driver because of its remarkable quietness and quick response. Other additional features can also be integrated, such as a software-based wear alarm on the dashboard. Bosch's APB-M will be in volume production in 2010. Bosch's APB-M can greatly improve the driver's comfort in a variety of situations while working with the Electronic Stability System (ESP). For example, when the vehicle stops on a slope, ESP can maintain the pressure in the brake system even after the driver removes his foot from the brake pedal. When the vehicle starts again, the brake is released. If the engine is turned off or the driver gets off, the motor will permanently lock the parking brake. When the driver starts the vehicle again, it is not necessary to release the brake by himself. The brake will be automatically released at the appropriate time. |
For SUMITOMO Cylinder Seal Kit
Maintenance of Sumitomo hydraulic cylinder seals
Daily maintenance and upkeep can effectively solve the sealing problem of hydraulic cylinders, extend the service life of hydraulic cylinders, and improve the work efficiency of construction machinery.
1. Regularly check the wear of the hydraulic cylinder seals, and if severe wear is found, it should be replaced in a timely manner.
2. Clean the hydraulic cylinder seals to prevent impurities such as dust and sand from entering the interior of the seals.
3. Use appropriate hydraulic oil and avoid using expired or non compliant hydraulic oil to avoid damage to the hydraulic cylinder seals.
4. Avoid using hydraulic cylinders under excessive pressure or load to avoid damage to the seals.
5. Regularly check the liquid level and pressure of the hydraulic cylinder to ensure its normal operation and avoid damage to the sealing components due to hydraulic cylinder failures.
6. When the hydraulic cylinder is stopped for a long time, regular maintenance should be carried out, such as applying anti rust oil, to prevent aging or deformation of the sealing components.
For Sumitomo Cylinder Seal Kit, For Sumitomo Center Joint Seal Kit, Sumitomo Center Joint Seal Kit, Sumitomo Bucket Cylinder Seal Kit
Safe Seal Technology Co., Ltd. , https://www.jsspreals.com