1, select the universal socket valve. For example, the choice of a SUN SXCA-LBN sequence valve, a jack is T11A, there are many types of valves using the jack, such as relief valve RVCA-LAN, pressure relief valve PBDB-LAN, shuttle valve CSAX- XXN and so on. T11A is a 3-way valve socket, however, some two-way valve can also use 3-way forming reamer, such as DTDA-MHN two-way solenoid valve, although the use of T13A socket, but also T11A can also be used to twist Knife processing. Because the size of the following two mouths is the same. So, you can buy less molded knives, which do not save on it ^ _ ^ 2, some companies to plug the valve, the socket specification is very good. Like CCC company is. As long as the two ports, the same valve through the same specifications, the same jack, the tool can be shared. 3, that the valve itself, the surface quality of the valve has a great impact on the use. Some are chrome-plated, like the SUN valve, some are galvanized, like the CCC's valve, and others are nickel-plated. According to the use of comparative experience, or better SUN. Nickel plating is also very good. Galvanized to be worse. (Personal opinion) 4, depends on the valve response time. Some valves, the response time is very slow, some quickly. Some simply no response time data. SUN's valve is still very good. (Not advertising). 5, it is best to find the two companies plug the same valve. So there are two companies available, but also interchangeable, that's fine. Taiwan's home company's valve jack just like SUN's. 6, the same, try to use the same jack, the valve functions the same, but there are a variety of regulating valve. Like the SUN PBDB valve, both manual screw adjustment of the ordinary valve, there are proportional pressure relief valve. In this way, if it is to be adjusted to the ratio, it is convenient, do not need to redesign the valve. 7, the biggest drawback of the current use of threaded cartridge valve is no standard socket standard, all the different companies (unless it is copy), so poor interchangeability. Unlike plate valves, there is a uniform standard, ready to change the brand. Therefore, we still have to choose a large company, good product quality plug valve, this equipment to repair replacement valve a few years later, you can buy the same valve, otherwise the trouble is big. Do you see is not it? More keyword search: Cartridge valve
Automotive Plastic Parts
Automotive plastic parts are components made of various plastics that are used in the manufacture and repair of vehicles. These parts are used in various areas of the vehicle, including the interior, exterior, engine, and more. They are favored for their light weight, low cost and versatility.Automobile Parts.
1. Instrument Panel: This is the control panel located directly in front of the driver of the vehicle that displays the instruments and controls for vehicle operation.
2. Headlight and Taillight Covers: These covers are often made of polycarbonate due to its high impact resistance and ability to be formed into complex shapes.
3. Seat Belts: Although seat belts are not entirely made of plastic, seat belts often use plastic parts for their buckles and adjustment mechanisms.Car Spare Parts.
4. Air filters: They are usually made of various types of plastic and are used to filter out harmful particles from the air before it enters the engine.
5. Engine parts: Many parts of the engine, such as valve covers, oil pans, intake manifolds, etc., can be made of plastic to reduce weight and cost.
6. Radiator Fans: These fans are usually made of plastic due to their heat resistance and light weight.
7. Rim decorative cover, embedded on the wheel hub, plays a decorative role.Automobile Spare Parts
These are just a few examples of the many plastic components used in automotive applications. The use of plastics in vehicles continues to grow.Car Components.
Automobile Parts,Car Spare Parts,Automobile Spare Parts,Car Components
Kunshan Muchun Electric Co., LTD , https://www.nbmuchunelectric.com