1.Features:
1).THE SURFACE OF THE BEDWAYS IS SUPERSONIC FREQUENCY HARDENED.
2).GEARS PRECISELY GROUND TO REDUCE NOISE.
3).SPINDLE BORE 165MM.
4)NO NEED FOR CHANGE GEAR.THE MACHINE CAN TRUN 72 KINDS OF METRIC, INCH, MODULE AND D.P. THREADS.
5).CLUTCH IN HEADSTOCK MAKES THE LATHE MORE SAFE AND RELIABLE.
2.Our machine CHY6266A ,CHY6280A Specification:
Â
| Model | CHY6266A | CHY6280A | CHY62100A | |
| CAPACITY | Max.swing over bed | 660mm | 800mm | 1000mm |
| Max.swing over cross slide | 435mm | 545mm | 545mm | |
| Max.swing over gap | 860mm | 1000mm | 1200mm | |
| Effective length of gap | 280mm | |||
| Center Distance | 1000\2000\3000\4000mm | |||
| Bed Width | 400mm | |||
| HEADSTOCK | Spindle hole | 165mm | ||
| Spindle nose | ISO-A15 | |||
| Spindle taper | Metric 175mm | |||
| Spindle speed(Number) | (ccw/12)9-938rpm(cw/4)15-578rpm | |||
| FEEDS | Longitudinal feeds range | 72kinds 0.073-4.066mm/rev | ||
| Cross feeds range | 72kinds 0.036-2.033mm/rev | |||
| Metric threads range | 72kinds 0.5-112mm | |||
| Inch threads range | 72kinds 1/4-56inch | |||
| Moudle threads range | 36kinds 0.5-7mπ | |||
| Diametral threads range | 36kinds 4-56D.P | |||
| CARRIAGE | Max.travel of top slide | 110mm | ||
| Max.travel of cross slide | 325mm | |||
| Max.size of toolshank | 32*32m2 | |||
| TAILSTOCK | Dia.of tailstock sleeve | 90mm | ||
| Taper of tailstock sleeve | MT6 | |||
| Max.travel of tailstock | 150mm | |||
| MOTOR | Main drive motor | 7.5KW | 11KW | |
| Rapid traverse motor | 250W | |||
| Coolant pump motor | 125W | |||
| PACKING L*W*H |
Center Distance(1000mm) | 285*115*185cm | ||
| Center Distance(2000mm) | 385*115*185cm | |||
| Center Distance(3000mm) | 485*115*185cm | |||
| Center Distance(4000mm) | 585*115*185cm | |||
| N.W/G.W | Center Distance(1000mm) | 3200/3400kg | 3350/3550kg | 3500/3700kg |
| Center Distance(2000mm) | 3700/4000kg | 3850/4150kg | 3900/4200kg | |
| Center Distance(3000mm) | 4050/4400kg | 4200/4550kg | 4350/4600kg | |
| Center Distance(4000mm) | 4400/4800kg | 4550/4950kg | 4700/5100kg | |
| ***STANDARD ACCESSORIESÂ | ||||
| 2 sets 3-jaw Φ500MM | ||||
| Steady rest & follow rest | ||||
| Face plate | ||||
| Drive plate | ||||
| Thread-cutting dial | ||||
| Longitudinal touch stop | ||||
| Work lamp | ||||
| Coolant system | ||||
| Full-length splash guard(only for 1000mm and 2000mm length) | ||||
| Foot brake and brake ribbon | ||||
| Rapid travel | ||||
| Paddings | ||||
| Change gears | ||||
| Dead centre and centre sleeve | ||||
| Oil gun | ||||
| One whole set spanner | ||||
| ***OPTIONALÂ ACCESSORIES | ||||
| Live centre | ||||
| Digital readouts(SINO) | ||||
| CE-conformity(Chuck guard and Toolpost guard) | ||||
| Magnetoelectrical brake | ||||
| Taper cutting function | ||||
Â
3.Our lathe machine loading in Container photos.
4.FAQ
1.Question : Are you a factory or trading company ?
Answer: We are an SGS recognized OEM / ODM manufacturer factory with export license. we have an experienced team made up of "A" player who have a passion for doing something great to create more value for customers world-wide.
2. Question : Why choose cooperate with us ?
Answer :
--Reliable Quality and All components from world leading suppliers ;
--Cost-effective export infrastructure and total supply chain management ;
3. Question : Where is your factory located ? How can I visit there ?
Answer: With an ISO90001 certified factory located in Chizhou city,Anhui Province, P.R. China . It takes about 2 hours from Nanjing by train. Warmly welcome clients to visit us .
4. Question : Can you do OEM ?
Answer : Yes, we have the ability to do OEM / ODM to meet clients' requirements.
5. Question : How does your factory do regarding quality control ?
Answer: Reliable Quality is our dignity and we do quality checking carefully such as Incoming Quality Control, In Process Quality Control, Outgoing Quality Control , Environment Control, Product Traceabitity System , Internal Audits & Calibration, Equipment Control & Maintenance, Control of Non-Conforming Materials and etc.
Welcome you to visit our company website (www.huisn.cn)to send enquiry to us so you would get the best factory direct price,it is only for you !
Â
1.Features:
1).THE SURFACE OF THE BEDWAYS IS SUPERSONIC FREQUENCY HARDENED.
2).GEARS PRECISELY GROUND TO REDUCE NOISE.
3).SPINDLE BORE 165MM.
4)NO NEED FOR CHANGE GEAR.THE MACHINE CAN TRUN 72 KINDS OF METRIC, INCH, MODULE AND D.P. THREADS.
5).CLUTCH IN HEADSTOCK MAKES THE LATHE MORE SAFE AND RELIABLE.
2.Our machine CHY6266A ,CHY6280A Specification:
Â
| Model | CHY6266A | CHY6280A | CHY62100A | |
| CAPACITY | Max.swing over bed | 660mm | 800mm | 1000mm |
| Max.swing over cross slide | 435mm | 545mm | 545mm | |
| Max.swing over gap | 860mm | 1000mm | 1200mm | |
| Effective length of gap | 280mm | |||
| Center Distance | 1000\2000\3000\4000mm | |||
| Bed Width | 400mm | |||
| HEADSTOCK | Spindle hole | 165mm | ||
| Spindle nose | ISO-A15 | |||
| Spindle taper | Metric 175mm | |||
| Spindle speed(Number) | (ccw/12)9-938rpm(cw/4)15-578rpm | |||
| FEEDS | Longitudinal feeds range | 72kinds 0.073-4.066mm/rev | ||
| Cross feeds range | 72kinds 0.036-2.033mm/rev | |||
| Metric threads range | 72kinds 0.5-112mm | |||
| Inch threads range | 72kinds 1/4-56inch | |||
| Moudle threads range | 36kinds 0.5-7mπ | |||
| Diametral threads range | 36kinds 4-56D.P | |||
| CARRIAGE | Max.travel of top slide | 110mm | ||
| Max.travel of cross slide | 325mm | |||
| Max.size of toolshank | 32*32m2 | |||
| TAILSTOCK | Dia.of tailstock sleeve | 90mm | ||
| Taper of tailstock sleeve | MT6 | |||
| Max.travel of tailstock | 150mm | |||
| MOTOR | Main drive motor | 7.5KW | 11KW | |
| Rapid traverse motor | 250W | |||
| Coolant pump motor | 125W | |||
| PACKING L*W*H |
Center Distance(1000mm) | 285*115*185cm | ||
| Center Distance(2000mm) | 385*115*185cm | |||
| Center Distance(3000mm) | 485*115*185cm | |||
| Center Distance(4000mm) | 585*115*185cm | |||
| N.W/G.W | Center Distance(1000mm) | 3200/3400kg | 3350/3550kg | 3500/3700kg |
| Center Distance(2000mm) | 3700/4000kg | 3850/4150kg | 3900/4200kg | |
| Center Distance(3000mm) | 4050/4400kg | 4200/4550kg | 4350/4600kg | |
| Center Distance(4000mm) | 4400/4800kg | 4550/4950kg | 4700/5100kg | |
| ***STANDARD ACCESSORIESÂ | ||||
| 2 sets 3-jaw Φ500MM | ||||
| Steady rest & follow rest | ||||
| Face plate | ||||
| Drive plate | ||||
| Thread-cutting dial | ||||
| Longitudinal touch stop | ||||
| Work lamp | ||||
| Coolant system | ||||
| Full-length splash guard(only for 1000mm and 2000mm length) | ||||
| Foot brake and brake ribbon | ||||
| Rapid travel | ||||
| Paddings | ||||
| Change gears | ||||
| Dead centre and centre sleeve | ||||
| Oil gun | ||||
| One whole set spanner | ||||
| ***OPTIONALÂ ACCESSORIES | ||||
| Live centre | ||||
| Digital readouts(SINO) | ||||
| CE-conformity(Chuck guard and Toolpost guard) | ||||
| Magnetoelectrical brake | ||||
| Taper cutting function | ||||
Â
3.Our lathe machine loading in Container photos.
4.FAQ
1.Question : Are you a factory or trading company ?
Answer: We are an SGS recognized OEM / ODM manufacturer factory with export license. we have an experienced team made up of "A" player who have a passion for doing something great to create more value for customers world-wide.
2. Question : Why choose cooperate with us ?
Answer :
--Reliable Quality and All components from world leading suppliers ;
--Cost-effective export infrastructure and total supply chain management ;
3. Question : Where is your factory located ? How can I visit there ?
Answer: With an ISO90001 certified factory located in Chizhou city,Anhui Province, P.R. China . It takes about 2 hours from Nanjing by train. Warmly welcome clients to visit us .
4. Question : Can you do OEM ?
Answer : Yes, we have the ability to do OEM / ODM to meet clients' requirements.
5. Question : How does your factory do regarding quality control ?
Answer: Reliable Quality is our dignity and we do quality checking carefully such as Incoming Quality Control, In Process Quality Control, Outgoing Quality Control , Environment Control, Product Traceabitity System , Internal Audits & Calibration, Equipment Control & Maintenance, Control of Non-Conforming Materials and etc.
Welcome you to visit our company website (www.huisn.cn)to send enquiry to us so you would get the best factory direct price,it is only for you !
Â
RUNDE speciallized in bronze fittings,covered end feed and solder type and the flange,Bronze Fittings.well known as yorkshiire bronze fittings,pegler bronze or gunmetal fittings as well as connex bronze fittings
bronze fittings,Yorkshire bronze fittings,Pegler bronze fittings,gunmetal fittings
Taizhou Runde Company , https://www.zjbronzefittings.com