It is believed that for individuals and companies engaged in cargo transportation, the provisions of the “Road Safety Protection Regulations†that will be implemented on July 1, 2011 are already familiar with the regulations on overloading. Overloading is an old problem, and various kinds of measures to deal with it are endless. If weight-based tolls are economically unreasonable for users to feel overloaded, then the "Regulations" will be managed from the qualifications of transport.
In order to rule over Chao, 4 out of the "Regulations"
Along with the implementation of the "Regulations," the "PRC Highway Regulations" was abolished. On October 13, 1987, the State Council promulgated the "Road Management Regulations," and the "Road Management Regulations" came into force on January 1, 1988. On December 27, 2008, the State Council amended the Regulations on Highway Administration and implemented it on January 1, 2009. There are no regulations on overloading of roads before the amendments to the Highway Management Regulations.
In recent years, transportation, public security, and other departments have joined together to control the Chao, and they have seen significant results while still rebounding from time to time. In order to govern this chronic disease in accordance with the law, the "Regulations" summarizes the experience of super-administration in recent years. The following provisions are mainly made:
The first is to supervise the production and sales of vehicles and strengthen source control. The "Regulations" stipulates that the dimensions, axle load and total mass of the vehicle should conform to the standards set by the state, and those that do not meet the standards must not produce or sell.
The second is to supervise the bulk cargo collection and distribution sites, and stipulate that the road transport management agency shall supervise and inspect the coal, cement and other cargo distribution sites and freight stations, and stop the vehicles (stations) that do not meet the state's relevant transportation standards; and provide that any organization or Individuals must not instruct and force the driver of the vehicle to exceed the limit.
The third is to improve the measures for overhauling inspections. The "Regulations" clearly stipulates the establishment of over-limit inspection sites, the supervision and inspection responsibilities of highway management agencies for over-limit transportation, and the standardization of law enforcement, as well as the prohibition and evasion of over-limit inspections.
The fourth is to increase the penalties for violations of violations of the law to ensure that all regulations can be effectively complied with.
The transportation industry is very hurt
The current transportation costs are too high and there is no way to make money without overloading. After the implementation of the "Regulations", it would be a dilemma for us to revoke the operation certificate within three years of overloading. A truck user stated that the "Regulations" are indeed a heavy blow.
Affected by the "Regulations" also includes the commercial vehicle transportation industry. The biggest difference between vehicle logistics and general cargo flow is that the trailer is illegal. The standard length of the existing commodity trucks in China is 16.5 meters, which is only enough for the average length of three cars. According to the standards of each of the three vehicles, only six regular cars are allowed to be pulled, so that the operation can only lose money.
In general, the length of the trucks for goods vehicles will be lengthened to 20-25 meters, and 12 vehicles will be transported. The total cargo weight is only 20 tons, plus the self-weight of more than 10 tons of the trucks, and the total weight is only 30 tons. Overloading is totally different from the transportation of goods such as containers and coal. This industry is still not standardized, and state-owned enterprises do not dare to invest. Many of the current investment entities are individuals or small private enterprises. With the implementation of the "Regulations", the number of investors may decrease.
On March 22, 2011, COSCO Logistics announced that it had transferred the entire automobile logistics business and officially withdrew from the commodity truck logistics industry, which seemed to prove this view.
Perform effects to guess
In the previous round of centralized rectification of overloading and overloading, sometimes the relevant departments were blind and closed one eye, and once the shortage of materials, they also actively relaxed the scale of cargo.
In the traditional environment of human relations and affection, it is difficult to completely change the status quo of overloading. However, the "Regulations" will bring certain benefits to the automotive industry because the total volume of vehicles will increase due to the reduction in the volume of single-vehicle shipments due to the management of overload.
As far as the current road transportation industry is concerned, if there is only one penalty, two major phenomena are likely to occur: First, logistics costs will be further increased and passed on to consumers; second, road freight companies will be shrinking. This is contrary to the original intention of the "Regulations", so in addition to strict control over the overload limit on the one hand, on the other hand have to solve the stubborn illness in the logistics industry.
2 ton sitting on electric reach truck
Zowell FRB20 model sitting on Electric Reach Truck is standard with side shift function. It is an industrial material handling equipment, which refers to the forward moving wheel type vehicle which carries out loading and unloading, stacking and short distance transportation of the good by pallets.
There are also many options like camera and monitor, EPS function, AGV modification, height preselection function etc. The sitting on electric reach truck is a high performance truck with perfect performance and excellent safety.
What's more, it is equipped with intelligent system, American Curtis controller system, double AC system ensure its flexible operation in the big warehouse.
Detail features
1. Wider area for the leg
The legroom of the operating position is ample, allowing the operator to move
flexibly. They will feel comfortable without worrying about being cramped.
2. Sitting type operation
The seat is adjustable. The soft seat can relieve fatigue and provide a safe
and comfortable driving experience for operators.
3. Design of low center of gravity
The design of low center of gravity can ensure stability of the truck so that
it is anti-overturning even in complex working conditions.
4. height-limited lifting
5. Turning speed limiting device
The precise high speed limiting turning control technology can prevent side
overturning, thus protecting the goods from dropping.
6. Good lifting ability
The max lifting height is 9000mm which can meet the requirements of goods
stacking in certain height.
7. Front moving function
The fork can move forward for 590cm,which can reduce turning radius of the
truck as well as ensure running stability.
8. Small turning radius
This reach truck has a small turning radius which is only 1700mm. It can move flexibly even in very tight warehouse and workshop areas.
9. Tilt forward and backward
The fork can tilt forward and backward for easy loading and unloading of goods and material, thus improving the transporting stability of the reach truck.
10. Forged fork
The width of the fork can be adjusted within the range of 200-760mm. It is
suitable for working conditions with both single side pallets and double side
pallets.
Reach Truck,Reach Truck Forklift,Electric sitting on Forklift,Hyster reach truck
Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklift.com