How to choose the dustproof system of flame cutting machine?

R&D of science and technology is the driving force for the continuous progress of society. The use of large-scale machinery has led to the continuous advancement of industrial civilization. As a part of the cutting machine industry, we always aim at innovation and serve our customers. Welcome everyone to discuss cooperation. Details:/
When the stainless steel continuous casting slab is flame-cut, it must be sprayed with iron powder to cause red iron oxide dust to fly. At the same time, the cutting slag is granulated with high-pressure water during the cutting process, and the flue gas contains part of the water vapor. Dust removal devices must be used under these conditions. At present, dry dust removal has been widely used in foreign stainless steel production plants. Compared with the wet electrostatic precipitator, it not only saves investment, is easy to operate, and does not have water pollution problems. Therefore, the dust removal of the stainless steel slab flame cutting machine mostly uses dry dust removal. Generally, a plurality of dust suction ports are arranged on the side wall of the slag ditch along the direction in which the cutting machine travels, and because the dust has characteristics of small particles, high water content, and strong corrosion, the dust removal system adopts a dry bag filter at the same time as To prevent condensation in the bag filter, hot air traps are placed on the hot billets, which are then mixed into a dust removal pipe after the dehydrator, and are collectively fed into a bag filter.
【China Cutter Trading Network is now giving back to the old and new members, special ad space for free experience activities, a golden opportunity, first look oh. Log on to the official website for the latest information:/
Editor: zgqgjjyw

EDM Graphite

EDM graphite, also known as graphite block for EDM, is a new type of material, which is now more and more widely used in the precision mold processing industry. At present, in mold processing plants in developed European countries, more than 90% of mold processing electrode materials are graphite. Copper, the once dominant electrode material, has almost lost its advantages compared with graphite electrodes.

Our isostatic graphite and Molded Graphite were tested at the National Electrical Carbon Products Quality Supervision and Inspection Center. The main physical and chemical performance index as follows: the compressive strength--125 mpa, shore hardness -- 65 degrees, resistivity --12 mu Ω m. At the same time, the 10μm,8μm,6μm,4μm products have already began Large-scale production,.and unanimously acknowledged by customers. The 2μm,1μm graphite products are under trial. Our company high quality of isostatic pressing special graphite yield above 90%, far ahead of industry the yield of 70%, the first in the country.

Edm Graphite,Graphite Block For Edm,Edm Graphite Electrodes,Isostatic Graphite Column

CARBONS TECH&CREATION(HENAN) INDUSTRY CO.,LTD , https://www.kygraphiteblock.com