· Volvo luxury car platform will launch the first car in China

Recently, Jenswardell, director of equipment technology at the Volvo Daqing plant, revealed that the new model will be mass-produced and put on the market next year. The car will be the first luxury sedan produced by the SPA platform in China, and More luxury cars will be launched later. In this regard, Netcom had previously learned from the Daqing Development and Reform Commission: the first model will be named S90L, the car will be extended on the basis of Volvo's new mid-size sedan S90, competitors will lock the BMW 5 Series Li and other large and medium luxury cars.
In Volvo's production system, the company has two architectures, one is SPA and the other is CMA platform, in which CMA architecture is mainly used to produce small cars, that is, 40 series and below, while SPA modular architecture is used for production. 60 series of mid-size cars and 90 series of luxury car products. With the Volvo SPA modular architecture settled in the Daqing plant, the production base has the ability to produce the new 60 Series-90 series. According to Volvo's previously announced plan, the first model of the plant will be officially mass-produced and launched next year. The car will enter the medium and large luxury car market, mainly competing for BMW 5 Series Li and Audi A6L. After the S60L is made, Volvo will Reinforce the strength in the medium and large luxury car market.
According to Volvo's product planning, starting from the new generation of XC90, the Volvo brand will be upgraded in 2017. The Volvo flagship sedan S90 will be officially launched next year, the same as the new XC90, which will also be equipped with the latest Drive-E power system. For the models put into production in the Chinese market, Dennis Nobelius, vice president of Volvo Vehicle Line 90, has revealed that the next-generation S80 will be named S90, and Volvo will also launch the extended version of the S90L for the Chinese market.
In terms of power, the Volvo S90L will still use the Drive E intelligent engine cluster, which will be close to the engine power parameters of the new XC90. In the 2.0T engine equipped with the new XC90, it is divided into 2.0T T5, 2.0T T6 and other engines according to the adjustment. The T5 model has a maximum power of 180 kW and a peak torque of 350 Nm. The T6 has a maximum power of 235 kW and a peak torque of 400 Nm. In addition, the Volvo S90L is also expected to be equipped with plug-in hybrid power, which consists of a T6 engine and a motor, the fuel consumption of the vehicle is expected to be only 2.1L, far lower than the use of traditional gasoline-powered models.
After entering the domestic automobile market, S90L will enter the luxury medium and large vehicle segment. In this field, the Audi A6L and the BMW 5 Series Li have the same choice to lengthen the vehicle and the length of the vehicle exceeds 5 meters. This approach undoubtedly meets the domestic consumers' demand for interior space. Prior to the S60, the S60 was introduced in the extended version. Therefore, after the implementation of the Volvo S90, it is expected to continue the trend of lengthening the body. After the domestic production, the length is expected to be greater than 5000mm, and then compete with this level of the Audi A6L.


Up-acting Press Brake

File Cabinet Processing
Intermediate Pressurization
Easy to Bend Within 30mm
Thin plate sharp tool
According to the feedback from cylinder suppliers, our company is currently the manufacturer with the most comprehensive dimensions and the largest shipments in China.
Three oil cylinders over two meters
Oil pump life up to 20 years
The down-moving bending machine is a common sheet metal processing equipment, also known as the down-stroke bending machine or the pendulum bending machine. It is mainly composed of fuselage, workbench, upper mold, lower mold, control system and so on.

The working principle of the down-moving bending machine is: put the metal sheet on the workbench, the upper mold presses the metal sheet, and the lower mold moves downward, so that the metal sheet is bent between the upper mold and the lower mold, and finally forms the desired shape. desired shape. The advantages of the down-moving bending machine are simple operation, high bending precision, wide application range and high production efficiency.
Down-moving bending machines are widely used in various sheet metal processing industries, such as machinery manufacturing, aerospace, automobile manufacturing, electronic communications, etc. It can be used to produce various parts, such as chassis, racks, frames, brackets, etc.

The down-moving bending machine has the following advantages and characteristics:
1. Simple operation: The operation of the down-moving bending machine is relatively simple, and does not require too much technical experience and professional knowledge. Operators only need simple training to start operation.
2. High bending precision: The bottom-moving bending machine uses the pressure of the upper and lower molds to complete the bending, which can ensure the accuracy of the bending angle and bending lines, thereby ensuring the quality of the processed parts.
Wide range of application: The down-moving bending machine can process various metal plates, such as steel plates, stainless steel plates, aluminum plates, etc., and has a wide range of applications.
3. High production efficiency: The down-moving bending machine adopts electro-hydraulic servo system, which can realize high-speed and high-precision bending processing and improve production efficiency.


Up-acting hybrid cnc press brake MG/MGP series model parameter picture RAGOS

Up-acting hybrid cnc press brake,Servo Motor CNC Press Brake,Metal bending machine,CNC Bending Machine, CNC Bending Machine Processing, CNC press brake

FOSHAN RAGOS NC EQUIPMENT CO.,LTD. , https://www.ragosnc.com