In place of the 40 watt component, the price in the German region fell by 0.7%, the price of most products remained stable, and the price of a small number of products was lowered. In Germany, there were three new LED filament bulbs launched in July, two of which were launched by OSRAM, both of which are 4W 470lm, one for $5.00. In addition, Philips introduced a 4.5W 470lm LED Consulting Center (LEDinside) According to the latest price report, in July 2017, global LED bulb prices continued to decline. The average retail price of LED bulbs replacing 40-watt incandescent lamps fell by 0.9% to US$6.5. The average retail price of LED bulbs replacing 60-watt incandescent lamps fell 2.8%. , for $7.8. LEDinside analyst Yu Bin said that the price declines in Europe, America and Japan are more obvious. On the one hand, the low-cost market-taking strategy of manufacturers, and on the other hand, the introduction of low-priced new products in the market, resulting in a decline in the overall average price. Prices in China have been raised, mainly due to the price cuts of international manufacturers. Market demand is still strong, China's LED device prices remain stable China's LED packaging, lighting LED packaging device prices remain stable, although the chip manufacturers have released capacity since the third quarter, but the market demand is still tight, the price is stable. 2835 is currently the most used product on the market. As the price has been low, the price reduction space is not large, the price has been stable for several months; the price of 3030LED products above 1W has remained stable, and the medium power 3030 products have been slightly raised by some international manufacturers. Global light bulb prices continued to decline, filament lamps continued to heat up in Europe to replace 40 watts, and prices in Germany fell by 0.7%. Prices of most products remained stable and prices of small products were lowered. In Germany, three new LED filament bulbs were launched in July, two of which were launched by OSRAM, both of which are 4W 470lm, one for $5.00. In addition, Philips introduced a 4.5W 470lm product for $6.76. Prices in the UK fell 1.3%, and OSRAM launched two new filament bulbs, all at below-average prices. Prices in the US fell 2.1%, and some products declined significantly due to the decline in promotional prices, such as the Cree 6W 460lm bulb, and the price of 8 packs fell to 34.95, a drop of more than 40%. Prices in mainland China rose slightly by 1.1%, as prices of some international manufacturers have been adjusted back. In other regions, Japan's price fell by 2.0%, and Ohm Motor introduced a new 4.3W 500lm bulb, which is priced at only $4.77, far below the average market price. Prices in South Korea and Taiwan have remained stable. In place of the 60-watt segment, prices in Germany and the UK both showed significant declines, at 4.5% and 3.9% respectively, and some manufacturers lowered product prices in order to seize the market. In addition, Philips launched a new 7.5W 806lm LED filament lamp in the German region, priced at 7.18 US dollars, slightly lower than the market average price. Prices in Japan fell by 3.1%. The prices of some of the original products in the market dropped significantly, including brands such as Toshiba and Alice Oyama. In addition, ohm motors have introduced several new products at lower prices. The price of mainland China rose by 1.8%, mainly due to the increase in the price of international brand products. Prices in South Korea and Taiwan have declined slightly. (æ–‡/LEDinside Allen)
Roller ceramic coating is a surface treatment process where a layer of ceramic material is deposited onto the surface of a roller. This type of coating is typically used to improve the wear and corrosion resistance of the roller and to reduce friction. Roller ceramic coatings can be made from a variety of materials, including alumina, zirconia, and silicon carbide, and can be applied using various methods, such as thermal spraying, flame spraying, and plasma spraying. The ceramic coating can provide a durable and hard surface that can withstand high temperatures, abrasion, and corrosion, making it ideal for use in harsh operating environments.
Roller Ceramic Coating,Mud Roller,Durable Mud Roller,High Performance Mud Roller
Hebei Tongye Metallurgy Technology Co., Ltd. , https://www.hbtyyejin.com